verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X100-75S

The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X100-75S is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 25 to 100 mm on the machine — no shims, no part change.

  • BoreØ80 mm
  • Max stroke100 mm
  • Adjustable range25–100 mm
  • Adjuster threadM20×1.5
  • Port sizePT3/8
  • CushionFixed NBR bumper (both ends)
$170.98 $178.48Save 4% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ80 stroke, mounting and version on one page All SDAJ80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X100-75S

The AirTAC SDAJ80X100-75S is a double-acting compact cylinder featuring an external M20x1.5 adjustment screw that dials the extend stop directly on your machine. You can tune the outward stroke anywhere between 25 and 100 mm without swapping shims or parts, while the retract motion remains full length. The short riveted body significantly reduces axial mounting depth where a standard round-body unit will not fit.

The built-in -S magnet supports AirTAC reed or electronic switches for precise end-position sensing. End-of-travel shock is managed by a fixed NBR bumper, which decelerates the load but is not an adjustable air cushion.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X100-75S Technical Specifications

ModelAirtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X100-75S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ80 mm
Max stroke100 mm
Adjustable range25 – 100 mm
Adjuster thread (R)M20×1.5
Port sizePT3/8
Acting typeDouble acting
Rod end threadM14×1.5 F / M22×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø80mm)

PressurePush forcePull force
0.5 MPa2268 N2268 N
0.7 MPa3175 N—
Max (@1.0 MPa)463 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X100-75S

SDAJCompact double-acting cylinder with adjustable stroke.
80Bore size in mm.
×100Maximum stroke length in mm.
-75Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X100-75S Is Used

straighten

Press Stroke Calibration

Dial the M20x1.5 screw to set precise 25-100 mm extend stops during press changeovers, accommodating different material thicknesses without mechanical rework.

sync_alt

Assembly Line Positioning

Fine-tune the extend position on the fly for varied part sizes, using the built-in magnet with electronic switches to confirm the adjusted end-stop.

Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X100-75S the Right Cylinder?

Choose this unit when production lines require frequent on-site stroke tuning to accommodate varying material thicknesses.

Confirm the 80 mm bore, 100 mm max stroke, 75 mm window, and PT3/8 port match your pneumatic supply. The -S code ensures a piston magnet for solid-state or reed sensing, and the rod end accepts female M14x1.5 or male M22x1.5 threads. Remember that a plain cylinder drifts when air is lost or a valve centers; the fixed bumper only decelerates near the end and the R screw is a mechanical stop, not a lock. For secure load holding without live pressure, integrate an external rod lock or pilot-operated check valve.

AirtacDistr lists every SDAJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj80-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 25–100 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M20×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X100-75S FAQ

The theoretical maximum push is 513 kgf at 1.0 MPa.

The external M20x1.5 screw shortens the extend stroke by up to 75 mm, allowing usable outward travel between 25 and 100 mm. The -S option includes a built-in piston magnet for AirTAC reed or electronic switches.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X100-75S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ80X100-75S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.