
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X110-20B is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 90 to 110 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X110-20B is a double-acting compact cylinder built with a riveted body that minimizes axial footprint, excelling where space is tight. It features an external M20x1.5 adjuster screw, letting you dial the extend stop directly on the machine between 90 and 110 mm without swapping parts.
This specific SKU includes a male M22x1.5 piston rod thread and utilizes a PT3/8 air port. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this configuration lacks a piston magnet, so it cannot support reed or electronic sensing without the -S variant.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X110-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 110 mm |
| Adjustable range | 90 – 110 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×110 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Choose this exact configuration if your fixture requires a male M22x1.5 rod end and on-site extend tuning across the 20mm window.
Keep in mind that a plain SDAJ cylinder will not hold a load if air pressure drops or the valve is centered; the piston will drift, as the fixed bumper only decelerates near the end of travel and the adjuster acts as a mechanical stop, not a lock. For suspended loads, integrate an external rod lock or a pilot-operated check valve. Confirm your setup requires the PT3/8 port, the 110mm maximum stroke, and operates within the 30-500 mm/s speed range.
AirtacDistr lists every SDAJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj80-adjustable-cylinder
Quick checklist
Turning the external M20x1.5 screw shortens the extend stroke from the 110mm maximum down to 90mm. It acts only as a mechanical stop and does not lock the piston; for load holding without live air pressure, you must use an external rod lock or pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.