
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X110-30B is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 80 to 110 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X110-30B is a double-acting compact cylinder featuring an external adjustable extend stop. By turning the R (M20x1.5) screw, you can shorten the forward stroke on-site across an 80 to 110 mm window without swapping parts.
This model utilizes a short riveted body to minimize axial mounting depth in tight machinery envelopes. It features a male-threaded piston rod (M22x1.5) for secure external load attachment and a fixed NBR bumper at each end to decelerate the stroke. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X110-30B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 110 mm |
| Adjustable range | 80 – 110 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×110 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the male M22x1.5 rod stroke on-site to accommodate varying pallet widths during production line changeovers.
Set mechanical end limits for lifts moving loads up to 128.1 kg, using the M20x1.5 adjuster to fine-tune the exact raise height.
When sizing this 80 mm bore actuator, consider the neighboring options.
Operators who require frequent changeovers or trial positioning will benefit from the 30 mm on-machine adjustment window. Remember that the fixed NBR bumper only decelerates the stroke end; it does not function as a lock. If your application requires load holding during air loss or valve centering, you must integrate an external rod lock or a pilot-operated check valve. This unit is configured with a PT3/8 port, a male M22x1.5 rod thread, and no magnet.
AirtacDistr lists every SDAJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj80-adjustable-cylinder
Quick checklist
The air port is PT3/8.
Turning the external R (M20x1.5) screw mechanically shortens the extend end position from the 110 mm maximum down to 80 mm. This specific SKU does not have a piston magnet, so it cannot accept reed or electronic switches; you would need the -S variant for sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.