
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X110-40 is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 70 to 110 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X110-40 is a compact double-acting double-rod cylinder engineered for on-site extend positioning. An external M20x1.5 adjuster screw lets you dial the forward stop anywhere between 70 and 110 mm, eliminating the need for shims or part swaps during machine commissioning.
This 80 mm bore actuator features a short riveted body that significantly reduces axial mounting depth where space is tight. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Operating pressure spans 0.15 to 1.0 MPa, and the unit accepts standard AirTAC compact-cylinder accessories.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X110-40 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 110 mm |
| Adjustable range | 70 – 110 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×110 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 70-110 mm extend stop during initial press tooling alignment to prevent over-travel without machining custom spacers.
Stepping down to a 63 mm bore drops the output to 1558.6 N, whereas moving up to a 100 mm bore increases it to 3927 N.
Choose this configuration if your fixture setup demands frequent trial positioning or changeover within the 70 to 110 mm window. The piston rod measures 25 mm with a female M14x1.5 rod-end thread and a PT3/8 air port. Note that this base SKU lacks a piston magnet, so it cannot support reed or electronic switches. Furthermore, a plain cylinder does not hold position upon air loss; the fixed bumper only decelerates near the end, so integrate an external rod lock or pilot-operated check valve for load holding.
AirtacDistr lists every SDAJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj80-adjustable-cylinder
Quick checklist
At 0.7 MPa, push increases to 3518.6 N. The theoretical maximum push is 513 kgf at 1.0 MPa.
Turning the M20x1.5 external screw shortens the extend stroke by up to 40 mm, allowing the rod to stop anywhere between 70 and 110 mm. The retract stroke remains full, and the adjuster acts purely as a mechanical stop, not a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.