
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X110-75 is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 35 to 110 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X110-75 is a double-acting compact cylinder featuring an external M20x1.5 adjuster screw that dials the extend stop anywhere between 35 and 110 mm. The short riveted body drastically reduces axial mounting depth, fitting easily into tight machine frames where longer profile cylinders cannot.
This 80 mm bore unit relies on a fixed NBR bumper at each end to decelerate the stroke, meaning it is not an adjustable air cushion or a locking brake. Operating pressure spans 0.15 to 1.0 MPa, and the piston rod measures 25 mm in diameter. Note that this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X110-75 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 110 mm |
| Adjustable range | 35 – 110 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×110 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adapt diverting arms on the fly for varying package sizes, using the 75 mm adjustment window to reposition the mechanical stop quickly between production runs.
When sizing this model, evaluate your force requirements against its neighbours: stepping down to the 63 mm bore drops the 0.5 MPa push to 1558.6 N, while moving up to the 100 mm bore increases it to 3927 N. The 75 mm adjustment window is perfect for trial positioning and rapid changeovers, allowing operators to set the extend endpoint without swapping shims or parts.
Remember that a plain SDAJ does not hold position or load when air is lost or the valve is centred; the fixed bumper only decelerates near the end of travel. For load holding without live pressure, you must integrate an external rod lock or a pilot-operated check valve. Confirm your bore, 110 mm maximum stroke, 75 mm window, PT3/8 port, and female M14x1.5 rod-end thread before ordering.
AirtacDistr lists every SDAJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj80-adjustable-cylinder
Quick checklist
It operates between 0.15 and 1.0 MPa at speeds of 30-500 mm/s.
Turning the external M20x1.5 R screw shortens the extend stroke by up to 75 mm, allowing you to set the endpoint anywhere between 35 and 110 mm without changing parts. The screw acts only as a mechanical stop and does not lock the piston; for load holding on air loss, use an external rod lock or pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.