
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X110-75B is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 35 to 110 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X110-75B is a double-acting compact cylinder featuring an external adjustable extend stop. By turning the R (M20x1.5) screw, you can dial the outward stroke from 35 mm up to the full 110 mm directly on your machine without changing parts or adding shims. This on-site tuning capability drastically reduces commissioning time during format changeovers.
The short riveted body saves valuable axial mounting depth where round-body or profile cylinders will not fit. End shock is handled by a fixed NBR bumper, which decelerates the piston near the end of travel but is not an adjustable air cushion. This specific SKU includes a male M22x1.5 piston rod thread and operates without a piston magnet.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X110-75B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 110 mm |
| Adjustable range | 35 – 110 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×110 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjusting the extend stop from 35 to 110 mm via the M20x1.5 screw during product family changeovers, avoiding the need to swap out entire actuators.
Executing 2513.3 N pressing tasks in tight machine cells where the compact riveted body saves critical axial mounting depth over longer stroke designs.
When sizing this model, evaluate your force requirements against neighbouring bores.
Choose this unit if your fixture requires precise outward positioning adjustments across a 35 to 110 mm range. It features a PT3/8 air port, a 75 mm adjustment window, and a male-threaded rod end (M22x1.5). Remember that a plain cylinder does not hold position or load when air is lost or the valve is centred; the fixed bumper only decelerates near the end and the R screw is a mechanical stop, not a lock. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj80-adjustable-cylinder
Quick checklist
The adjustable stop does not alter these force outputs.
No, this specific SKU lacks the -S option and therefore has no piston magnet, meaning it cannot accept reed or electronic switches. You would need to select the -S variant to enable sensor mounting in the body grooves.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.