
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X120-75B is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 45 to 120 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X120-75B is a double-acting compact cylinder featuring an external extend stop. By turning the M20x1.5 adjuster screw, you can dial the outward stroke anywhere between 45 and 120 mm directly on your machine, avoiding part swaps during changeovers. The short riveted body saves crucial axial mounting depth where a larger profile cylinder will not fit.
This specific SKU includes a male M22x1.5 piston rod thread and lacks a piston magnet. End-of-travel deceleration is handled solely by a fixed NBR bumper, which is not an adjustable air cushion.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X120-75B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 120 mm |
| Adjustable range | 45 – 120 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×120 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 45-120 mm extend stop during initial tooling setup to find the exact contact point for heavy press operations without machining custom spacers.
Lift loads up to 128.1 kg safely, using the fixed NBR bumper to absorb the end shock while relying on an external check valve to prevent drift on air loss.
Choose this male-rod configuration when your tooling requires an M22x1.5 threaded attachment. It connects via a PT3/8 port and operates between 30-500 mm/s. Remember that a plain cylinder cannot hold a load if air pressure drops or the valve centres; the bumper only decelerates near the end of travel. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj80-adjustable-cylinder
Quick checklist
The M20x1.5 adjuster screw mechanically shortens the extend stroke from the 120 mm maximum down to 45 mm without altering force. This SKU uses a male M22x1.5 piston rod thread and ships without a piston magnet, so it cannot accept reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.