verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X15-10

The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X15-10 is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 5 to 15 mm on the machine — no shims, no part change.

  • BoreØ80 mm
  • Max stroke15 mm
  • Adjustable range5–15 mm
  • Adjuster threadM20×1.5
  • Port sizePT3/8
  • CushionFixed NBR bumper (both ends)
$93.95 $101.45Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ80 stroke, mounting and version on one page All SDAJ80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X15-10

The AirTAC SDAJ80X15-10 is a compact double-acting double-rod cylinder featuring an external M20x1.5 adjustment screw that dials the extend stop from 5 to 15 mm directly on your machine. The short riveted body drastically saves axial mounting depth where a longer conventional cylinder would fail to fit.

End-of-travel deceleration is handled by a fixed NBR bumper at each end, which absorbs shock but is not an adjustable air cushion. Operating speed spans 30-500 mm/s, and the PT3/8 port matches the 80 mm bore specification. Note that this specific SKU lacks a piston magnet, so it cannot support magnetic sensing without switching to the -S variant.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X15-10 Technical Specifications

ModelAirtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X15-10
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ80 mm
Max stroke15 mm
Adjustable range5 – 15 mm
Adjuster thread (R)M20×1.5
Port sizePT3/8
Acting typeDouble acting
Rod end threadM14×1.5 F / M22×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø80mm)

PressurePush forcePull force
0.5 MPa2268 N2268 N
0.7 MPa3175 N—
Max (@1.0 MPa)463 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X15-10

SDAJCompact double-acting cylinder with adjustable stroke.
80Bore size in mm.
×15Maximum stroke length in mm.
-10Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X15-10 Is Used

factory

Short-Depth Clamping

Fit the compact riveted body into tight machinery footprints where axial length is restricted, using the fixed NBR bumper to absorb the impact of heavy 80 mm bore clamping forces.

Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X15-10 the Right Cylinder?

Choose this model for heavy setup-heavy lines requiring frequent on-site stroke tuning across the 5-15 mm window.

Confirm the 80 mm bore, 15 mm maximum stroke, 10 mm adjust window, PT3/8 port, female rod-end thread, and absence of a magnet. Remember that a plain cylinder does not hold its load on air loss or valve centring—the piston drifts and the fixed bumper only decelerates near the end. For a securely held load without live pressure, install an external rod lock or a pilot-operated check valve.

AirtacDistr lists every SDAJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj80-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 5–15 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M20×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X15-10 FAQ

The air port is PT3/8.

Turning the M20x1.5 external screw shortens the extend stroke by up to 10 mm, giving a usable 5-15 mm range. The screw is a mechanical stop, not a mid-stroke lock; the cylinder cannot hold a load on air loss without an external rod lock or pilot-operated check valve.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X15-10

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ80X15-10 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.