verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X20-10

The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X20-10 is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 10 to 20 mm on the machine — no shims, no part change.

  • BoreØ80 mm
  • Max stroke20 mm
  • Adjustable range10–20 mm
  • Adjuster threadM20×1.5
  • Port sizePT3/8
  • CushionFixed NBR bumper (both ends)
$97.21 $104.71Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ80 stroke, mounting and version on one page All SDAJ80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X20-10

The AirTAC SDAJ80X20-10 is a double-acting, double-rod compact cylinder featuring an on-site adjustable extend stop. An external M20x1.5 screw lets you dial the forward end-position anywhere between 10 and 20 mm without swapping parts.

The short riveted body drastically reduces axial mounting depth, fitting where larger profile cylinders cannot. End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X20-10 Technical Specifications

ModelAirtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X20-10
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ80 mm
Max stroke20 mm
Adjustable range10 – 20 mm
Adjuster thread (R)M20×1.5
Port sizePT3/8
Acting typeDouble acting
Rod end threadM14×1.5 F / M22×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø80mm)

PressurePush forcePull force
0.5 MPa2268 N2268 N
0.7 MPa3175 N—
Max (@1.0 MPa)463 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X20-10

SDAJCompact double-acting cylinder with adjustable stroke.
80Bore size in mm.
×20Maximum stroke length in mm.
-10Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X20-10 Is Used

precision_manufacturing

Heavy Clamping Dial-In

Fine-tune the 10 to 20 mm extend stop on heavy machining fixtures to dial in exact clamping force without machining new spacers.

vertical_align_center

Vertical Lift Positioning

Set precise downward travel for a 128.1 kg vertical lift rig, relying on the M20x1.5 screw to establish a safe mechanical stop.

factory

Short-Depth Pressing

Utilize the compact riveted body to fit pressing assemblies into tight machine frames where axial length is highly restricted.

Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X20-10 the Right Cylinder?

When sizing this 80 mm bore, compare it directly with its neighbors.

Operators requiring frequent changeover or trial positioning will benefit from the 10 mm adjustment window. Remember that a plain cylinder drifts if air is lost or the valve centers; the fixed bumper only decelerates near the end of the stroke. For load holding without live pressure, install an external rod lock or pilot-operated check valve. This configuration confirms an 80 mm bore, 20 mm stroke, 10 mm window, PT3/8 port, female rod thread, and no magnet.

AirtacDistr lists every SDAJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj80-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 10–20 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M20×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X20-10 FAQ

The theoretical maximum push is 513 kgf at 1.0 MPa.

The M20x1.5 screw mechanically shortens the extend stroke from the 20 mm maximum down to 10 mm. This SKU has no piston magnet, so it cannot accept reed or electronic switches; you would need the -S option for sensing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X20-10

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ80X20-10 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.