
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X20-10B is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 10 to 20 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X20-10B is a compact double-acting double-rod cylinder built for tight axial spaces, featuring an external M20x1.5 adjustment screw that lets you dial the extend stop directly on the machine between 10 and 20 mm. The short riveted body drastically cuts mounting depth where a conventional round-body unit will not fit.
This specific SKU omits the piston magnet, so it cannot host reed or electronic switches, but it carries the -B option for a male M22x1.5 piston rod thread. End-of-stroke energy is managed solely by a fixed NBR bumper that decelerates the impact, meaning it is not an adjustable air cushion or a braking lock. Operating speed spans 30-500 mm/s across a 0.15 to 1.0 MPa pressure range.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X20-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 20 mm |
| Adjustable range | 10 – 20 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×20 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 10 to 20 mm on the shop floor to set precise press depths for bearings without machining new spacers.
Rapidly adjust the male M22x1.5 rod extension between product batches on high-mix assembly lines to accommodate varying part heights.
Confirm the 80 mm bore, 20 mm stroke, 10 mm adjust window, and PT3/8 port match your pneumatic supply. The male M22x1.5 rod end is standard here, and note that a plain cylinder drifts when air is lost or the valve centres—the fixed bumper only decelerates near the end; for load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj80-adjustable-cylinder
Quick checklist
The theoretical maximum push force is 513 kgf at 1.0 MPa.
The M20x1.5 adjuster screw mechanically shortens the extend stroke by up to 10 mm, yielding a usable 10 to 20 mm range while retract remains full. This SKU includes the -B male M22x1.5 rod thread, and because it lacks the -S magnet, it cannot accept reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.