
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X20-20B is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 0 to 20 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X20-20B is a compact double-acting double-rod cylinder featuring an external M20x1.5 adjustment screw that dials the extend stop from 0 to 20 mm directly on your machine. The short riveted body minimizes axial mounting depth where round-body or profile cylinders cannot fit.
This specific SKU includes a male-threaded M22x1.5 piston rod and lacks a piston magnet, meaning it cannot host reed or electronic switches without switching to an -S variant. End-of-stroke deceleration relies on a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Operating speed spans 30-500 mm/s, and the PT3/8 air port handles the necessary flow for this 80 mm bore.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X20-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 20 mm |
| Adjustable range | 0 – 20 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×20 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the male M22x1.5 rod extension on-site to accommodate varying package sizes on a packaging line during rapid format changeovers.
Utilize the short riveted body to fit tight machinery frames, securing heavy workpieces with up to 513 kgf of theoretical clamping force.
Conversely, if your load is lighter, the SDAJ63 provides 1558.6 N and saves space. This 80 mm bore is ideal for operators needing on-site stroke tuning during frequent changeovers without swapping parts. The usable extend range is 0-20 mm, while retract remains full. Note that a plain cylinder does not hold position on air loss; for vertical loads, install an external rod lock or pilot-operated check valve, as the fixed bumper only decelerates near the end and the R screw is a mechanical stop, not a lock. Confirm the male M22x1.5 rod thread and PT3/8 port suit your mounting hardware.
AirtacDistr lists every SDAJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj80-adjustable-cylinder
Quick checklist
At 0.7 MPa, push increases to 3518.6 N. The theoretical maximum push force is 513 kgf at 1.0 MPa.
The M20x1.5 screw mechanically shortens the extend stroke by up to 20 mm, allowing on-site tuning between 0 and 20 mm. It does not alter the output force. The cylinder cannot hold a load on air loss; you need an external rod lock for load holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.