
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X25-10 is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 15 to 25 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X25-10 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M20x1.5) screw, you can dial the forward end-position down to 15 mm from the 25 mm maximum directly on the machine. This on-site tuning eliminates the need for shims or part swaps during changeovers. The adjuster strictly sets the mechanical stop, leaving the effective piston area untouched so force equals a standard SDA of this bore.
The piston rod measures 25 mm with a PT3/8 air port. End shock is managed by a fixed NBR bumper that decelerates the stroke end; it is not an adjustable air cushion. Note this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X25-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 25 mm |
| Adjustable range | 15 – 25 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×25 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Ideal for raising 128.1 kg loads where the R (M20x1.5) screw sets the exact upper travel limit, preventing mechanical interference in tight vertical spaces.
Speeds up product changeovers by allowing the extend stop to be wound back by up to 10 mm instantly, accommodating varied part heights on the same line.
Choose this unit if your fixture requires precise on-site stroke tuning within the 15 to 25 mm window.
Confirm your bore, 25 mm maximum stroke, 10 mm adjust window, PT3/8 port, and female rod-end thread requirements. Because this SKU has no -S magnet, sensing is not possible without changing the model. A plain cylinder does not hold its load on air loss or when the valve is centred—the piston drifts and the bumper only decelerates near the end. For a held load without live pressure, specify an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj80-adjustable-cylinder
Quick checklist
Operating pressure is 0.15-1.0 MPa, proof pressure is 1.5 MPa, and speed ranges from 30 to 500 mm/s.
Turning the external R (M20x1.5) screw mechanically shortens the extend stroke from the 25 mm maximum down to 15 mm; retract remains full and force is unchanged. This specific SKU has no piston magnet, so it cannot take a magnetic switch; you would need the -S variant for reed or electronic sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.