
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X25-20 is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 5 to 25 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X25-20 is a compact double-acting double-rod cylinder featuring an external M20x1.5 adjuster screw that dials the extend stop from 5 to 25 mm directly on your machine.
Its short riveted body drastically cuts axial mounting depth where larger profile or round-body units cannot fit. End shock is managed by a fixed NBR bumper that decelerates the stroke, meaning it is not an adjustable air cushion. Note this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X25-20 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 25 mm |
| Adjustable range | 5 – 25 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×25 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Install this riveted compact body in tight machinery frames where axial length is restricted, adjusting the extend position on-site to accommodate different tool heights.
Choose this model if your assembly requires on-site stroke tuning to perfect heavy end positions.
Confirm your requirements for the 80 mm bore, 25 mm maximum stroke, 20 mm adjustment window, and PT3/8 port. Because this base configuration has no internal magnet, position sensing is impossible without the -S variant. Remember that a plain cylinder drifts when air is lost or a valve centers; the fixed bumper only decelerates near the end of travel and acts as a mechanical stop, not a lock. For secure load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj80-adjustable-cylinder
Quick checklist
This 80 mm bore cylinder uses a PT3/8 air port.
Turning the M20x1.5 adjuster screw shortens the extend end position anywhere between 5 and 25 mm without changing the force output. The screw is strictly a mechanical stop, not a mid-stroke lock, and the cylinder cannot hold a load if air pressure is lost.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.