
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X25-30 is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 0 to 25 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X25-30 is a compact double-acting double-rod cylinder featuring an external M20x1.5 adjuster screw that dials the extend stop from 0 to 25 mm directly on your equipment. The short riveted body drastically reduces axial mounting depth where larger profile cylinders cannot fit.
This 80 mm bore unit uses a PT3/8 air port and a 25 mm piston rod to generate substantial thrust. End-of-travel energy is managed strictly by a fixed NBR bumper, which decelerates the piston near the end of the stroke but is not an adjustable air cushion. Operating speed spans 30-500 mm/s across a 0.15-1.0 MPa pressure range.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X25-30 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 25 mm |
| Adjustable range | 0 – 25 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×25 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Fits into tight machine footprints via its short riveted body while delivering enough clamping force to secure heavy workpieces in automated machining cells.
It is specifically designed for setups requiring frequent on-site stroke tuning to perfect end positions without swapping parts.
Confirm the 80 mm bore, 25 mm maximum stroke, 30 mm adjustment window, and PT3/8 porting fit your manifold. This specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches; select the -S option if sensing is required. Remember that a plain cylinder does not hold position on air loss or valve centering—the fixed bumper only decelerates near the end, so add an external rod lock or pilot-operated check valve for load holding.
AirtacDistr lists every SDAJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj80-adjustable-cylinder
Quick checklist
Turning the M20x1.5 external screw shortens the extend stroke by up to 30 mm, allowing the rod end to be dialed anywhere between 0 and 25 mm. It acts as a mechanical stop and does not alter the output force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.