
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X30-10B is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 20 to 30 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X30-10B is a compact double-acting double-rod cylinder built for tight axial spaces where a larger profile body fails to fit. The extend stop is dialed on-site via an M20x1.5 adjustment screw, setting the outward travel between 20 and 30 mm without requiring shims or part swaps.
This unit features a male M22x1.5 piston rod thread and a PT3/8 air port. End shock is managed by a fixed NBR bumper that decelerates the piston near the end of travel, rather than acting as a lock. Because this SKU lacks a piston magnet, it cannot support reed or electronic switches; you would need the -S variant for position sensing.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X30-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 30 mm |
| Adjustable range | 20 – 30 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×30 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Quickly reposition the extend limit for varying product heights using the M20x1.5 adjuster screw, avoiding teardown during production line transitions.
Choose this bore if your setup requires heavy force in a shallow footprint.
The on-machine adjustability is perfect for trial positioning and frequent changeovers, letting you tune the 20-30 mm extend window directly at the fixture. Confirm your requirements for the 80 mm bore, 30 mm stroke, 10 mm window, PT3/8 port, male M22x1.5 rod, and lack of a magnet. Remember that a plain cylinder drifts when air is lost or a valve centers; the bumper only decelerates the stroke end. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj80-adjustable-cylinder
Quick checklist
Turning the M20x1.5 external screw shortens the extend stop by up to 10 mm, allowing you to set outward travel anywhere between 20 and 30 mm. The retract stroke remains full, and the screw acts as a mechanical stop, not a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.