
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X30-10S is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 20 to 30 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X30-10S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the M20x1.5 adjuster screw, you can dial the extend position down from the 30mm maximum to a 20mm minimum directly on the machine, eliminating the need for shims or part changes.
The short riveted body saves axial mounting depth where a round-body or profile cylinder will not fit. End-of-travel deceleration is handled by a fixed NBR bumper, which is not an adjustable air cushion. Equipped with a built-in magnet (-S), this unit supports AirTAC reed or electronic solid-state switches for position sensing.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X30-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 30 mm |
| Adjustable range | 20 – 30 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×30 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 20-30mm extend stop during heavy clamping calibration, ensuring 2513.3N of precise holding force without part changes.
Adjust the extend endpoint on the fly for vertical lift setups handling 128.1kg loads, using the M20x1.5 screw to fine-tune the drop point.
Speed up production line changeovers by turning the external adjuster to shift the extend stroke, avoiding the downtime of mechanical shim swaps.
Choose this specific model if your setup requires on-site stroke tuning within the 20-30mm window. Confirm the PT3/8 port, the 25mm piston rod, and the female M14x1.5 rod-end thread. Note that a plain cylinder does not hold its load on air loss or when the valve is centered; the piston drifts and the bumper only decelerates near the stroke end. For a held load, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj80-adjustable-cylinder
Quick checklist
The M20x1.5 screw shortens the extend stop by up to 10mm, giving a usable 20-30mm range without changing force. The built-in -S magnet works with AirTAC reed or electronic switches for position feedback.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.