
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X30-20 is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 10 to 30 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X30-20 is a double-acting compact cylinder featuring an external M20x1.5 adjuster screw that dials the extend stop between 10 and 30 mm directly on your machine. Its short riveted body saves axial mounting depth where a round-body or profile cylinder will not fit, delivering high force in tight spaces.
A fixed NBR bumper at each end decelerates the stroke end but is not an adjustable air cushion or a lock. Operating pressure spans 0.15-1.0 MPa, with a proof pressure of 1.5 MPa and a speed range of 30-500 mm/s. This specific SKU lacks a piston magnet and cannot take a magnetic switch; adding the -S variant enables reed or electronic sensing.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X30-20 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 30 mm |
| Adjustable range | 10 – 30 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×30 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Utilize the compact riveted body to fit within narrow machine frames, adjusting the 25 mm rod stroke on the fly for changeovers.
Choose it for setups requiring on-site stroke tuning between 10 and 30 mm without shims.
Confirm the 80 mm bore, 30 mm max stroke, 20 mm window, and PT3/8 port. The rod end thread is female M14x1.5 (or male M22x1.5 with a B code). This base unit has no magnet (no -S), so it cannot host sensors. A plain cylinder does not hold its load on air loss or valve centring—the piston drifts and the fixed bumper only decelerates near the end. For a held load, specify an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj80-adjustable-cylinder
Quick checklist
The M20x1.5 adjuster screw shortens the extend stop by up to 20 mm, allowing you to set the rod end anywhere between 10 and 30 mm. It acts as a mechanical stop and does not alter the force or lock the piston mid-stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.