
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X30-30S is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 0 to 30 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X30-30S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the M20x1.5 adjuster screw, you can dial the forward end-position from 0 to 30 mm directly on the machine without changing parts.
Its short riveted body saves valuable axial mounting depth where larger profile or round-body cylinders cannot fit. The unit includes a fixed NBR bumper at each end to decelerate the stroke, and the built-in magnet (-S) supports AirTAC reed or electronic solid-state switches for end-of-travel sensing.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X30-30S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 30 mm |
| Adjustable range | 0 – 30 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×30 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Fit the short riveted body into tight axial spaces to deliver 513 kgf maximum push force where standard profile cylinders exceed the available footprint.
When sizing this model, evaluate your force requirements against neighbouring bores.
Choose this specific configuration if your fixture requires on-site stroke tuning within the 0-30 mm window. It features a 25 mm piston rod, a PT3/8 air port, and a female M14x1.5 rod-end thread. Note that a plain cylinder does not hold a load if air pressure is lost or the valve is centered; for vertical load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj80-adjustable-cylinder
Quick checklist
The theoretical maximum push force is 513 kgf at 1.0 MPa.
The M20x1.5 screw shortens the extend stroke by up to 30 mm, giving a usable range of 0-30 mm without altering the force. The built-in -S magnet works with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.