
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X35-10B is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 25 to 35 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X35-10B is a compact double-acting double-rod cylinder built for tight axial spaces, featuring an external M20x1.5 adjustment screw that lets you dial the extend stop from 25 to 35 mm directly on the machine. This specific SKU uses a male M22x1.5 piston rod thread and lacks a piston magnet.
A fixed NBR bumper at each end handles end-of-stroke deceleration, meaning there is no adjustable air cushion to tune. Operating pressure spans 0.15 to 1.0 MPa, and the short riveted body conserves mounting depth where a larger profile cylinder will not fit. For high kinetic energy approaches, consider adding an external shock absorber to protect the assembly.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X35-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 35 mm |
| Adjustable range | 25 – 35 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×35 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 25 to 35 mm extend stop on the fly to set precise pressing depths for varying bearing sizes without manufacturing new spacers.
If you size downward, the SDAJ63 offers 1558.6 N at the same pressure; sizing upward to the SDAJ100 yields 3927 N. This model is ideal for setups requiring on-site stroke tuning during changeovers, as the R screw allows a 10 mm extend reduction without swapping shims or parts. The piston rod is 25 mm thick with a male M22x1.5 thread, and the air port is PT3/8.
Remember that a plain SDAJ does not hold position or load when air is lost or the valve is centered—the fixed bumper only decelerates near the end of travel and the adjuster is a mechanical stop, not a lock. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve. Also, because this SKU lacks the -S magnet option, it cannot accept reed or electronic switches for position sensing.
AirtacDistr lists every SDAJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj80-adjustable-cylinder
Quick checklist
At 0.7 MPa, push increases to 3518.6 N and pull to 3175 N. The theoretical maximum push force is 513 kgf at 1.0 MPa.
The external M20x1.5 adjuster screw mechanically limits the extend stroke, allowing you to shorten it from the nominal 35 mm down to 25 mm. This adjustment changes only the stop position, not the output force, and it does not lock the piston mid-stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.