
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X35-20B is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 15 to 35 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X35-20B is a double-acting compact cylinder featuring an external adjustable extend stop. An M20x1.5 adjustment screw lets you dial the outward stroke down by 20 mm directly at the machine, yielding a usable extend range of 15 to 35 mm without swapping shims or components.
The short riveted body significantly reduces axial mounting depth, fitting where round-body or profile cylinders cannot. This specific SKU includes a male-threaded M22x1.5 piston rod and lacks a piston magnet, meaning it cannot host reed or electronic switches. End-of-travel deceleration is handled strictly by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X35-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 35 mm |
| Adjustable range | 15 – 35 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×35 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Set exact raising heights in compact vertical lift stations where the short riveted body saves axial depth and the fixed NBR bumper absorbs end shock.
Quickly reposition the male M22x1.5 rod extension for varying product heights on automated lines, turning the M20x1.5 adjuster screw instead of machining new spacers.
Choose this adjusted-stop version if your fixture requires frequent trial positioning or rapid changeover. Note that a plain cylinder cannot hold a load if air pressure drops or the valve centers; the piston will drift, and the fixed bumper only decelerates near the end of travel. For suspended loads, integrate an external rod lock or pilot-operated check valve. Confirm your requirements for the PT3/8 port, 15-35 mm extend window, and male M22x1.5 rod thread.
AirtacDistr lists every SDAJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj80-adjustable-cylinder
Quick checklist
The M20x1.5 adjuster screw shortens the maximum 35 mm extend stroke down to 15 mm on-site, while the retract stroke remains full. This SKU uses a male M22x1.5 piston rod and lacks the -S magnet, so it cannot support magnetic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.