
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X35-20S is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 15 to 35 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X35-20S is a double-acting compact cylinder featuring an external R (M20x1.5) adjuster screw that lets you dial the extend stop from 15 to 35 mm directly on the machine.
Its short riveted body minimizes axial mounting depth where larger profile or round-body units fail to fit, while the built-in -S magnet supports AirTAC reed or electronic switches for end-position sensing. End shock is handled by a fixed NBR bumper that decelerates the stroke, which is not an adjustable air cushion. The bore-fixed PT3/8 port and 25 mm rod ensure robust pneumatic delivery for high-demand cycles.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X35-20S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 35 mm |
| Adjustable range | 15 – 35 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×35 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Choose this specific model if your fixture requires frequent on-site stroke tuning across the 15-35 mm window without changing parts. Confirm the 80 mm bore, 35 mm max stroke, 20 mm adjust window, PT3/8 port, female M14x1.5 rod thread, and the -S magnet for sensors. Note that a plain cylinder does not hold a load on air loss or valve centering; the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj80-adjustable-cylinder
Quick checklist
Turning the M20x1.5 R screw shortens the extend stroke by up to 20 mm, yielding a usable 15-35 mm range. The -S option provides a built-in piston magnet for AirTAC reed or electronic switches; the screw sets the stop, not a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.