verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X35-40S

The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X35-40S is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 0 to 35 mm on the machine — no shims, no part change.

  • BoreØ80 mm
  • Max stroke35 mm
  • Adjustable range0–35 mm
  • Adjuster threadM20×1.5
  • Port sizePT3/8
  • CushionFixed NBR bumper (both ends)
$121.40 $128.90Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ80 stroke, mounting and version on one page All SDAJ80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X35-40S

The AirTAC SDAJ80X35-40S is a compact double-acting double-rod cylinder engineered for on-site extend positioning. By turning the external M20x1.5 adjuster screw, you set the outward stop anywhere from 0 to 35 mm without changing parts. The retract motion remains full length.

This thin riveted-body design minimizes axial mounting depth where larger profile cylinders cannot fit. The unit features a 25 mm piston rod, a PT3/8 air port, and a fixed NBR bumper at each end to decelerate the stroke end. Equipped with a built-in piston magnet (-S), it supports AirTAC reed or electronic solid-state switches for position sensing.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X35-40S Technical Specifications

ModelAirtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X35-40S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ80 mm
Max stroke35 mm
Adjustable range0 – 35 mm
Adjuster thread (R)M20×1.5
Port sizePT3/8
Acting typeDouble acting
Rod end threadM14×1.5 F / M22×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø80mm)

PressurePush forcePull force
0.5 MPa2268 N2268 N
0.7 MPa3175 N—
Max (@1.0 MPa)463 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X35-40S

SDAJCompact double-acting cylinder with adjustable stroke.
80Bore size in mm.
×35Maximum stroke length in mm.
-40Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X35-40S Is Used

precision_manufacturing

Press Fit Depth Tuning

Dial the extend stop from 0 to 35 mm to set precise bearing seating depth without machining custom spacers.

sync_alt

Product Changeover Stops

Quickly reposition the outward reach on packaging lines handling varied container heights via the M20x1.5 screw.

Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X35-40S the Right Cylinder?

Stepping down to the SDAJ63 yields 1558.6 N, whereas the SDAJ100 provides 3927 N. Choose this specific model if your fixture requires exact outward reach tuning during setup or product changeover.

Confirm the 80 mm bore, 35 mm stroke, and 40 mm window match your spatial limits. The PT3/8 port and 25 mm rod are fixed by the bore. The -S magnet enables switch integration, while the female M14x1.5 rod thread handles the linkage. Note that a plain cylinder does not hold a load on air loss; the bumper only decelerates near the end, so add an external rod lock or pilot-operated check valve for suspended loads.

AirtacDistr lists every SDAJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj80-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 0–35 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M20×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X35-40S FAQ

The external screw shortens the extend stop up to 40 mm, yielding a usable 0 to 35 mm outward range without altering force. The included -S magnet works with AirTAC reed or electronic switches for position confirmation.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X35-40S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ80X35-40S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.