
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X40-10 is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 30 to 40 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X40-10 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M20x1.5) screw, you can dial the forward stroke down from its 40 mm maximum to 30 mm directly on the machine, eliminating the need for shims or part changes. The adjuster sets the mechanical stop position without altering the internal piston area, meaning output force remains identical to a standard SDA of this bore.
End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches without upgrading to an -S variant.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X40-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 40 mm |
| Adjustable range | 30 – 40 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×40 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 30 to 40 mm during initial press fit tooling setup to find the exact seating depth for 128.1 kg vertical loads without swapping mechanical spacers.
Employ the mechanical R screw stop to set precise lifting heights in compact vertical lifting jigs, ensuring the piston bottoms out consistently at the desired extension.
Stepping down to an SDAJ63 yields 1558.6 N, whereas stepping up to an SDAJ100 provides 3927 N. It is tailored for setups requiring on-site stroke tuning between 30 and 40 mm.
Confirm your parameters before ordering: an 80 mm bore, 40 mm maximum stroke with a 10 mm adjustment window, a PT3/8 air port, and a female M14x1.5 rod-end thread. Because this SKU has no magnet, position sensing is unavailable. Furthermore, a plain cylinder does not hold its load if air pressure drops or the valve centers; the fixed bumper only decelerates near the end of travel and is not a lock. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj80-adjustable-cylinder
Quick checklist
The adjustment screw does not alter these force values.
Turning the M20x1.5 adjuster screw shortens the extend end position by up to 10 mm, allowing you to set the forward stroke anywhere between 30 and 40 mm on the machine. This mechanism is a mechanical stop only and does not act as a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.