
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X40-40S is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 0 to 40 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X40-40S is a double-acting compact cylinder featuring an external M20x1.5 adjuster screw that dials the extend stop down from the nominal 40 mm to zero, right on the machine. The short riveted body saves axial mounting depth where a larger profile cylinder will not fit.
This unit includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic solid-state switches along the body grooves. End-of-travel shock is handled by a fixed NBR bumper, which decelerates the piston near the end position but is not an adjustable air cushion. Operating speed ranges from 30 to 500 mm/s.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X40-40S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 40 mm |
| Adjustable range | 0 – 40 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×40 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 0 to 40 mm on the fly to set precise forming depth on heavy-duty press tools without machining new spacers.
Quickly reposition the extend endpoint for product family changeovers on high-mix assembly lines, saving setup minutes per cycle.
This SDAJ80X40-40S is ideal for setups needing on-site extend tuning between 0 and 40 mm without changing parts.
Confirm the 80 mm bore, 40 mm maximum stroke, 40 mm adjustment window, and PT3/8 air port suit your pneumatics layout. The -S code ensures switch readiness, and the rod end accepts a female M14x1.5 or male M22x1.5 thread. Note that a plain cylinder does not hold a load if air pressure drops or the valve centers; for load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj80-adjustable-cylinder
Quick checklist
The M20x1.5 external screw mechanically shortens the extend endpoint from 40 mm down to 0 mm without altering the force. The included -S magnet allows tracking by AirTAC reed or electronic solid-state switches, while a fixed NBR bumper decelerates the stroke end.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.