
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X45-40B is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 5 to 45 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X45-40B is a compact double-acting double-rod cylinder featuring an external M20x1.5 adjustment screw that dials the extend stop directly on your machine. You can set the extend position anywhere between 5 and 45 mm without swapping parts or adding shims, making it ideal for high-changeover fabrication lines.
This model uses a male M22x1.5 piston rod thread and a PT3/8 air port. The short riveted body saves valuable axial mounting depth where larger profile or round-body units cannot fit. End-of-stroke deceleration relies on a fixed NBR bumper rather than an adjustable air cushion, so for high-energy cycles you should slow the approach or mount an external shock absorber.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X45-40B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 45 mm |
| Adjustable range | 5 – 45 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×45 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the mechanical stop on-site when switching conveyor guide widths, leveraging the compact riveted body to fit tight transfer stations.
Choose this specific configuration when you need frequent on-site stroke tuning for trial positioning. Confirm the 45 mm maximum stroke, 40 mm adjust window, PT3/8 port, and the male M22x1.5 rod end. Note that a plain SDAJ does not hold position if air pressure drops or the valve centers—the piston will drift, as the fixed bumper only decelerates near the end of travel. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj80-adjustable-cylinder
Quick checklist
The adjustment screw does not alter these force values.
The external M20x1.5 screw shortens the extend stroke by up to 40 mm, allowing you to set the stop anywhere between 5 and 45 mm. It is strictly a mechanical stop, not a mid-stroke lock; the cylinder cannot hold a load if air is lost, so use an external rod lock for holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.