verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X50-10

The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X50-10 is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 40 to 50 mm on the machine — no shims, no part change.

  • BoreØ80 mm
  • Max stroke50 mm
  • Adjustable range40–50 mm
  • Adjuster threadM20×1.5
  • Port sizePT3/8
  • CushionFixed NBR bumper (both ends)
$113.75 $121.25Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ80 stroke, mounting and version on one page All SDAJ80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X50-10

The AirTAC SDAJ80X50-10 is a double-acting, double-rod compact cylinder featuring an external adjustable extend stop. A built-in M20x1.5 adjustment screw lets you dial the forward end-position anywhere between 40 and 50 mm directly on the machine, eliminating the need for shims or part swaps during changeovers.

This 80 mm bore actuator utilizes a short riveted body to minimize axial mounting depth in tight spaces, operating at speeds between 30 and 500 mm/s. End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches without upgrading to an -S variant.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X50-10 Technical Specifications

ModelAirtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X50-10
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ80 mm
Max stroke50 mm
Adjustable range40 – 50 mm
Adjuster thread (R)M20×1.5
Port sizePT3/8
Acting typeDouble acting
Rod end threadM14×1.5 F / M22×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø80mm)

PressurePush forcePull force
0.5 MPa2268 N2268 N
0.7 MPa3175 N—
Max (@1.0 MPa)463 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X50-10

SDAJCompact double-acting cylinder with adjustable stroke.
80Bore size in mm.
×50Maximum stroke length in mm.
-10Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X50-10 Is Used

precision_manufacturing

Heavy Press Fitment

Dial in the 40-50 mm extend stop during heavy press setups to prevent over-travel on sensitive 128 kg assemblies.

conveyor_belt

Inline Product Diversion

Fine-tune the diverting stroke on the fly for varying package sizes without changing the physical actuator body.

vertical_align_center

Vertical Lift Stops

Set precise lower limits for lifting tasks, using the mechanical stop to define the exact 40 mm drop height.

Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X50-10 the Right Cylinder?

This SDAJ80X50-10 is ideal for operators needing precise on-machine stroke tuning within a 40-50 mm window.

Confirm your requirements for an 80 mm bore, 50 mm maximum stroke, 10 mm adjustment window, PT3/8 air port, female rod-end thread, and no magnet. Remember that a plain cylinder does not hold its load on air loss or when the valve is centered; the piston drifts and the fixed bumper only decelerates near the end. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.

AirtacDistr lists every SDAJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj80-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 40–50 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M20×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X50-10 FAQ

The M20x1.5 screw shortens the extend stroke by up to 10 mm, allowing an end position between 40 and 50 mm. It acts strictly as a mechanical stop and does not lock the piston; air loss will cause drift.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X50-10

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ80X50-10 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.