
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X50-10B is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 40 to 50 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X50-10B is a double-acting compact cylinder featuring an on-site adjustable extend stop. By turning the external R (M20x1.5) screw, technicians can dial the forward stroke down from the 50 mm maximum to a 40 mm minimum without swapping shims or components.
Designed to save axial mounting depth where larger profile or round-body units fail to fit, this riveted-body actuator relies on a fixed NBR bumper at each end to absorb shock rather than an adjustable air cushion. This specific SKU includes a male-threaded piston rod (M22x1.5) for direct mounting and lacks a piston magnet, meaning it cannot host reed or electronic sensors without upgrading to the -S variant.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X50-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 50 mm |
| Adjustable range | 40 – 50 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×50 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Provides a compact riveted-body diverter for high-mass pallets, using the male M22x1.5 rod to push loads securely during frequent line changeovers.
Confirm the 80 mm bore, 50 mm stroke, 10 mm adjustment window, and PT3/8 air port match your pneumatic supply. Remember that a plain SDAJ does not hold position if air pressure drops or the valve centers—the fixed NBR bumper only decelerates near the end of travel. To suspend loads safely without live pressure, integrate an external rod lock or a pilot-operated check valve into your circuit.
AirtacDistr lists every SDAJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj80-adjustable-cylinder
Quick checklist
The external M20x1.5 screw shortens the extend stroke from 50 mm down to 40 mm on-site without altering the force. The -B code indicates a male M22x1.5 piston rod end, and this SKU lacks a magnet for sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.