
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-30 is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 30 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X60-30 is a compact double-acting double-rod cylinder engineered with an external adjustable extend stop. By turning the M20x1.5 adjuster screw, you can dial the forward end-position anywhere between 30 and 60 mm directly on the machine, eliminating the need for shims or part swaps during changeovers.
This 80 mm bore actuator features a short riveted body that conserves axial mounting depth in tight machinery layouts where larger profile cylinders cannot fit. It operates at 30-500 mm/s, utilizing a fixed NBR bumper at each end to decelerate the stroke rather than relying on an adjustable air cushion. Note that this specific SKU lacks a piston magnet, meaning it cannot support reed or electronic switches unless upgraded to an -S variant.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-30 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 60 mm |
| Adjustable range | 30 – 60 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 30 to 60 mm extend stop on a heavy assembly press to apply precise 2513.3 N clamping force without swapping mechanical spacers.
Adjust the stroke on the fly for different package sizes on a sorting line, using the M20x1.5 screw to reposition the diverter arm quickly.
Choose this 80 mm model when your application demands high force within a compact footprint.
Operators requiring frequent trial positioning or on-site stroke tuning will benefit from the 30 mm adjustment window. Confirm your requirements for an 80 mm bore, 60 mm maximum stroke, PT3/8 port, and the female M14x1.5 rod-end thread. Remember that a plain SDAJ does not hold position or load when air is lost or the valve is centered; the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj80-adjustable-cylinder
Quick checklist
It operates between 0.15 and 1.0 MPa at speeds of 30-500 mm/s.
Turning the external R (M20x1.5) screw shortens the extend stroke by up to 30 mm, allowing the rod to stop anywhere between 30 and 60 mm. This SKU does not include a piston magnet, so it cannot accept reed or electronic switches; you must select the -S option for sensing capabilities.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.