
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X65-20 is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 45 to 65 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X65-20 is a double-acting compact cylinder featuring an external M20x1.5 adjustment screw that dials the extend stop directly on your machine. You can tune the forward stroke anywhere between 45 and 65 mm without swapping shims or components, making it perfect for frequent format changeovers. Retract travel remains full length.
The short riveted body minimizes axial mounting depth where a larger profile cylinder cannot fit. End shock is managed solely by a fixed NBR bumper, which decelerates the stroke end but is not an adjustable air cushion.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X65-20 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 65 mm |
| Adjustable range | 45 – 65 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×65 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the extend position instantly during format changeovers to push different carton sizes, relying on the fixed NBR bumper to absorb the end shock.
This 80 mm option fits applications needing substantial force in a tighter footprint than the 100 mm variant.
Choose this specific configuration if your assembly requires on-site stroke tuning within the 45 to 65 mm window. Confirm your port size is PT3/8 and note this SKU lacks a magnet, so it cannot support magnetic sensing without upgrading to the -S variant. Because it uses a female M14x1.5 rod end, ensure your mounting avoids side load. Remember that a plain cylinder drifts on air loss; for load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj80-adjustable-cylinder
Quick checklist
At 0.7 MPa, push is 3518.6 N and pull is 3175 N. The theoretical maximum push is 513 kgf at 1.0 MPa.
Turning the M20x1.5 external screw shortens the extend end position by up to 20 mm, giving a usable forward stroke of 45 to 65 mm. This SKU has no piston magnet, so it cannot use reed or electronic switches; choose the -S option if sensing is required.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.