
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X65-30 is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 35 to 65 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X65-30 is a double-acting compact cylinder featuring an external M20x1.5 adjustment screw that dials the extend stop directly on your machine between 35 and 65 mm.
Its short riveted body significantly reduces axial mounting depth where larger profile or round-body units fail to fit. End-of-stroke deceleration relies on a fixed NBR bumper rather than an adjustable air cushion, so for high-energy cycles you should add an external shock absorber. This specific SKU lacks a piston magnet, so it cannot host reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X65-30 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 65 mm |
| Adjustable range | 35 – 65 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×65 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Install the compact riveted body in tight machine frames where axial depth is restricted, relying on the fixed NBR bumper for end deceleration.
Operators needing frequent changeover or trial positioning will benefit from the 30 mm on-site adjustment window. Remember that the fixed bumper only decelerates the stroke end; a plain cylinder drifts when air is lost or the valve is centred, so fit an external rod lock or pilot-operated check valve for load holding. Confirm your bore, 65 mm maximum stroke, 30 mm window, PT3/8 port, female M14x1.5 rod thread, and lack of magnet for this configuration.
AirtacDistr lists every SDAJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj80-adjustable-cylinder
Quick checklist
The M20x1.5 screw mechanically shortens the extend endpoint from 65 mm down to 35 mm without changing the output force. It is not a mid-stroke lock; the cylinder drifts on air loss, so use an external rod lock for holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.