
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X70-30 is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 40 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X70-30 is a double-acting, double-rod compact cylinder featuring an external adjustable extend stop. Turning the M20x1.5 adjuster screw lets you dial the extend position anywhere between 40 and 70 mm directly on the machine, avoiding part swaps during changeovers.
Built with a short riveted body, this unit saves substantial axial mounting depth where larger profile cylinders cannot fit. It uses a fixed NBR bumper at each end to decelerate the stroke, which is not an adjustable air cushion. Operating pressure spans 0.15 to 1.0 MPa, and the PT3/8 port matches the 80 mm bore specification for optimal flow.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X70-30 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 70 mm |
| Adjustable range | 40 – 70 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the extend stop on the fly to accommodate varying package sizes on a packaging line, relying on the compact riveted body to fit within tight transfer conveyor footprint constraints.
When sizing this model, evaluate your force requirements against neighbouring bores.
Choose this specific configuration if your fixture requires frequent on-site stroke tuning across a 40 to 70 mm window. Confirm your setup needs the 80 mm bore, 70 mm maximum stroke, 30 mm adjustability, and PT3/8 porting. Note that this SKU lacks a piston magnet, so position sensing is unavailable unless you specify the -S option. Furthermore, the fixed bumper only decelerates the end of travel; a plain cylinder does not hold a load on air loss or valve centring, so deploy an external rod lock or pilot-operated check valve for suspended loads.
AirtacDistr lists every SDAJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj80-adjustable-cylinder
Quick checklist
The theoretical maximum push is 513 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa, with a proof pressure of 1.5 MPa, and travels at speeds of 30-500 mm/s.
The external M20x1.5 screw acts as a mechanical stop that shortens the extend stroke from the 70 mm maximum down to 40 mm. It does not alter the pneumatic force or lock the piston mid-stroke. Because this SKU lacks a magnet, it cannot support reed or electronic switches, and the fixed bumper only decelerates the stroke end rather than holding position.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.