
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-50 is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 25 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X75-50 is a compact double-acting double-rod cylinder built for tight axial spaces. Its short riveted body saves mounting depth where round-body or profile cylinders will not fit. An external M20x1.5 R adjuster screw lets you dial the extend stop on-site between 25 and 75 mm without changing parts.
The adjuster sets the mechanical stop position, not the piston area, so output force equals a standard SDA of this bore. End shock is handled by a fixed NBR bumper, which decelerates the stroke end but is not an adjustable air cushion.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-50 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 75 mm |
| Adjustable range | 25 – 75 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 25 to 75 mm to set precise heavy press depths without swapping mechanical spacers.
When sizing, compare this 80 mm bore against its neighbors.
Choose this model for setups requiring frequent on-site stroke tuning across the 50 mm window. It features a PT3/8 port, a 25 mm rod, and female M14x1.5 rod-end threads. Note that this SKU lacks a magnet for sensing. A plain cylinder does not hold position on air loss; use an external rod lock or pilot-operated check valve for load holding.
AirtacDistr lists every SDAJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj80-adjustable-cylinder
Quick checklist
The theoretical maximum push is 513 kgf at 1.0 MPa.
Turning the M20x1.5 R screw shortens the extend stroke by up to 50 mm, allowing the rod to stop anywhere between 25 and 75 mm. It acts as a mechanical stop and does not alter the output force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.