
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-10B is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 75 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X85-10B is a double-acting, double-rod compact cylinder featuring an external adjustable extend stop. By turning the R (M20x1.5) screw, you can dial the extend position down from the nominal 85 mm to 75 mm directly on your machine without shims or part changes.
This 80 mm bore unit saves axial mounting depth through its short riveted body, fitting where round-body or profile cylinders cannot. It features a male-threaded M22x1.5 piston rod and a PT3/8 air port. End shock is handled by a fixed NBR bumper that decelerates the piston near the end of travel; it is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 85 mm |
| Adjustable range | 75 – 85 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Install the short riveted body in tight axial spaces to deliver high clamping force where larger profile cylinders cannot fit, adjusting the stroke on the machine floor.
Choose this 80 mm bore if your application requires that intermediate force level combined with on-site stroke tuning.
This configuration includes a 10 mm adjustment window (75-85 mm usable extend), a PT3/8 port, and a male M22x1.5 rod thread (option B). It carries no magnet (no -S code), meaning position sensing is unavailable on this specific unit. Remember that a plain cylinder does not hold its load if air pressure drops or the valve is centered; the piston will drift, and the fixed bumper only decelerates near the stroke end. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj80-adjustable-cylinder
Quick checklist
The adjustment screw does not alter these force values.
The M20x1.5 adjuster screw mechanically shortens the extend stroke from 85 mm down to 75 mm. It is a hard stop, not a mid-stroke lock, and the cylinder cannot hold a load if air is lost. For load holding, use an external rod lock or pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.