
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-50B is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 35 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X85-50B is a compact double-acting cylinder featuring an on-site extend stop. A M20x1.5 adjuster screw lets you dial the outward stroke anywhere between 35 and 85 mm, removing the need for shims or part swaps during commissioning. The short riveted body saves axial mounting depth where larger profile cylinders cannot fit.
This specific SKU includes a male M22x1.5 rod thread and lacks a piston magnet, meaning it cannot host reed or electronic switches without switching to the -S variant. End shock is managed solely by a fixed NBR bumper, not an adjustable air cushion.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-50B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 85 mm |
| Adjustable range | 35 – 85 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the outward stroke on-site to accommodate varying pallet widths on a packaging line, using the fixed NBR bumper to absorb end shock.
Choose this 80 mm bore with its 50 mm adjustment window for heavy setup-heavy lines requiring frequent changeover. It uses a PT3/8 port and a male M22x1.5 rod end. Remember that a plain SDAJ does not hold position on air loss or valve centering; the fixed bumper only decelerates near the end of travel. For suspended loads, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj80-adjustable-cylinder
Quick checklist
At 0.7 MPa, push is 3518.6 N and pull is 3175 N. The theoretical maximum push is 513 kgf at 1.0 MPa.
It is a stop only, not a mid-stroke lock; the cylinder drifts on air loss, so use an external rod lock for load holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.