
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-75B is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 10 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X85-75B is a double-acting compact cylinder featuring an external M20x1.5 adjuster screw that dials the extend stop from 10 to 85 mm directly on your machine.
Its short riveted body drastically cuts axial mounting depth where a larger profile unit will not fit, while end-of-stroke deceleration is handled by a fixed NBR bumper. This specific SKU includes a male M22x1.5 piston rod thread and lacks a piston magnet, meaning it cannot host reed or solid-state switches without upgrading to the -S variant.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-75B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 85 mm |
| Adjustable range | 10 – 85 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 10 to 85 mm to set precise pressing depths for varying bearing sizes without swapping out the entire actuator.
Adjust the reach of a sorting plunger on the fly to accommodate different package widths on a high-mix packaging line.
Set a mechanical lower limit for a 128 kg vertical lift tool, relying on the fixed NBR bumper to absorb the end-of-stroke shock.
Choose this configuration if your fixture requires frequent on-site stroke tuning during changeovers, and confirm the 80 mm bore, 85 mm maximum stroke, 75 mm window, PT3/8 port, and male M22x1.5 rod end. Remember that a plain cylinder drifts when air is lost or the valve is centered; the fixed bumper only decelerates near the end of travel and does not lock the load, so deploy an external rod lock or pilot-operated check valve for holding requirements.
AirtacDistr lists every SDAJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj80-adjustable-cylinder
Quick checklist
The theoretical maximum push is 513 kgf at 1.0 MPa, with an operating pressure range of 0.15-1.0 MPa and a speed of 30-500 mm/s.
Turning the external M20x1.5 screw shortens the extend stroke by up to 75 mm, giving a usable range of 10 to 85 mm. The screw acts only as a mechanical stop and does not alter force or lock the piston mid-stroke; the cylinder will drift if air pressure is lost.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.