
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X90-20 is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 70 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X90-20 is a compact double-acting double-rod cylinder built with a short riveted body to minimize axial mounting depth where space is tight. An external M20x1.5 adjustment screw lets you dial the extend end-position down from the 90 mm maximum to 70 mm directly on the machine, avoiding shims or part swaps during changeovers.
This 80 mm bore unit features a 25 mm piston rod and a PT3/8 air port. End-of-travel deceleration relies on a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion or a locking brake. Operating speed spans 30-500 mm/s across a 0.15-1.0 MPa pressure range. Note that this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X90-20 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 90 mm |
| Adjustable range | 70 – 90 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the 70-90 mm extend stop on the M20x1.5 screw during press fit setups to achieve exact insertion depths without swapping mechanical spacers.
Install the compact riveted body in tight machine frames where axial depth is restricted, relying on the fixed NBR bumper for end deceleration.
Choose this 80 mm bore when your application demands high force but has strict axial length limits that a larger profile cannot accommodate. It suits setups requiring frequent on-site stroke tuning between 70 and 90 mm to perfect a pressing or lifting motion.
Keep in mind that a plain SDAJ does not hold a load if air pressure drops or the valve centers; the piston will drift. For suspended loads without live pressure, install an external rod lock or pilot-operated check valve. Confirm your bore, 90 mm stroke, 20 mm window, PT3/8 port, female rod thread, and lack of magnet for this configuration.
AirtacDistr lists every SDAJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj80-adjustable-cylinder
Quick checklist
The M20x1.5 adjuster changes the stop position only, leaving these force values unchanged.
Turning the external R screw shortens the extend stroke by up to 20 mm, allowing you to set the end position anywhere between 70 and 90 mm on the machine. This specific SKU has no piston magnet, so it cannot accept AirTAC reed or electronic switches; you must select the -S variant for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.