
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X90-30B is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 60 to 90 mm on the machine — no shims, no part change.
It features an external M20x1.5 adjustment screw that lets you dial the extend stop down from 90 mm to 60 mm directly on the machine, eliminating the need for shims or part swaps during changeovers.
This specific SKU includes a male M22x1.5 piston rod end and lacks a piston magnet, meaning it cannot host reed or electronic switches without the -S option. End-of-stroke deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion. Operating speed spans 30-500 mm/s across a 0.15-1.0 MPa pressure range.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X90-30B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 90 mm |
| Adjustable range | 60 – 90 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the M20x1.5 stop screw to set precise 60-90 mm extend depths for seating bearings without swapping out the entire cylinder body.
Set the mechanical stop to halt a 128.1 kg vertical lift at the exact required height, relying on the fixed NBR bumper to absorb the end shock.
Choose this model if your fixture requires frequent on-site stroke tuning between 60 and 90 mm.
Confirm your parameters require a 30 mm adjustment window, a PT3/8 air port, and the -B male M22x1.5 rod thread. Remember that a plain cylinder does not hold position on air loss or valve centring; the piston drifts and the fixed bumper only decelerates near the end. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj80-adjustable-cylinder
Quick checklist
This 80 mm bore cylinder features a PT3/8 air port.
Turning the external R (M20x1.5) screw shortens the extend endpoint anywhere between 60 and 90 mm. The screw acts purely as a mechanical stop and does not alter force. It is not a mid-stroke lock; the piston will drift if air pressure is lost.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.