
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X90-40S is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 50 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X90-40S is a double-acting compact cylinder featuring an external M20x1.5 adjustment screw that dials the extend stop anywhere between 50 and 90 mm directly on your machine. The short riveted body drastically saves axial mounting depth where a larger profile cylinder will not fit.
This 80 mm bore unit uses a PT3/8 air port and a 25 mm piston rod to cycle at 30-500 mm/s. It relies on a fixed NBR bumper at each end to decelerate the stroke, meaning the cushion is not adjustable. The built-in magnet (-S) supports AirTAC reed or electronic solid-state switches for precise end-position sensing.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X90-40S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 90 mm |
| Adjustable range | 50 – 90 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the 50-90 mm extend stop during setup to precisely seat heavy bearings without re-machining hard stops.
Fine-tune the lift height at the machine for different pallet thicknesses, relying on the fixed NBR bumper for end deceleration.
Choose this 80 mm bore when your application demands high force but requires on-site stroke tuning to perfect the end position.
Remember that a plain SDAJ does not hold position or load when air is lost or the valve is centred; the fixed bumper only decelerates near the end of travel and the adjuster is a mechanical stop, not a lock. For load holding without live pressure, you must integrate an external rod lock or a pilot-operated check valve. Confirm your bore, 90 mm maximum stroke, 40 mm window, PT3/8 port, built-in magnet, and female rod-end thread for your assembly.
AirtacDistr lists every SDAJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj80-adjustable-cylinder
Quick checklist
The theoretical maximum push is 513 kgf at 1.0 MPa.
The M20x1.5 screw shortens the extend stroke by up to 40 mm, yielding a usable range of 50-90 mm without shims. The included -S magnet works with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.