verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ125X100-100S

The AirTAC SEJ Adjustable Cylinder SEJ125X100-100S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø125mm unit covers an effective stroke of 0–100mm without changing cylinders. Force is equal in both directions.

  • BoreØ125 mm
  • Nominal stroke100 mm
  • Adjust window100 mm
  • Effective stroke0–100 mm
  • Port sizePT1/2
  • CushionAdjustable, 40 mm
$298.46 $305.96Save 2% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ125 stroke, mounting and version on one page All SEJ125 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ125X100-100S

The AirTAC SEJ125X100-100S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 100mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas so the drive force is equal in both directions at 5734 N (0.5 MPa). You can dial the retract end from 0 to 100mm via a back-rod stop screw, letting one cylinder cover a variable positioning range without swapping hardware.

It carries a -S magnet for CMSE reed or DMSE electronic sensors. The extruded aluminum barrel omits external tie rods for a clean profile, and field-adjustable air cushions at both ends decelerate the heavy 125mm piston near stroke end. Remember the cushion and stop screw set the mechanical end; they do not hold position on air loss.

Airtac SEJ Adjustable Cylinder SEJ125X100-100S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ125X100-100S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ125 mm
Nominal stroke100 mm
Adjustment window100 mm (0–100 mm)
ConfigurationDouble rod, double acting
Port sizePT1/2
Rod threadM27×2
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 500 mm/s
CushionAdjustable, 40 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø125mm)

PressureForce (both directions)
0.5 MPa5734 N
0.7 MPa8027 N
Max (@1.0 MPa)1169 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ125X100-100S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
125Bore size in mm.
×100Nominal stroke length in mm.
-100Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ125X100-100S Is Used

precision_manufacturing

Press Stroke Calibration

Dial the 0-100mm window to precisely set the forming depth on heavy stamping presses, utilizing the 1169 kgf both-way force to shape thick metal plates.

settings

Machine Commissioning Trial

Fine-tune the end position during initial machine build by turning the back-rod stop screw, finding the exact clamping point before locking it down.

Is the Airtac SEJ Adjustable Cylinder SEJ125X100-100S the Right Cylinder?

This 125mm bore delivers 8028 N at 0.7 MPa and a maximum of 1169 kgf at 1.0 MPa in both directions. If your load requires less force, stepping down to the 100mm bore gives 3681 N at 0.5 MPa, while stepping up is not possible as 125mm is the largest standard SEJ size. If your machine only needs a fixed end stop, a standard SED double-rod cylinder is sufficient. For fail-safe load holding on air loss, add an external rod lock.

When replacing an ISO 15552 cylinder, match the 125mm bore, the 0-100mm adjustment window, PT1/2 port, and your mounting choice from Basic, FA, LB, TC, FTC, TCM1, or TCM2. Since the stroke is 100mm, side loading is minimal, but always guide external loads to prevent rod binding.

AirtacDistr lists every SEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sej125-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (100mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 100mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ125X100-100S FAQ

The retract end is mechanically adjustable over a 100mm window. The effective stroke can be dialed down from the nominal 100mm all the way to 0mm. You set the exact end position with a stop screw on the back rod and lock it after tuning.

Because a rod exits both ends, the force is identical in extend and retract. It provides 5734 N at 0.5 MPa, 8028 N at 0.7 MPa, and a maximum of 1169 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ125X100-100S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ125X100-100S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.