verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ125X100-30S

The AirTAC SEJ Adjustable Cylinder SEJ125X100-30S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø125mm unit covers an effective stroke of 70–100mm without changing cylinders. Force is equal in both directions.

  • BoreØ125 mm
  • Nominal stroke100 mm
  • Adjust window30 mm
  • Effective stroke70–100 mm
  • Port sizePT1/2
  • CushionAdjustable, 40 mm
$298.46 $305.96Save 2% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ125 stroke, mounting and version on one page All SEJ125 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ125X100-30S

The AirTAC SEJ125X100-30S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 30mm adjustable stroke window. A rod exits both ends, meaning you can dial the retract end from 70mm up to 100mm to perfectly match a mechanical stop. Because the piston sees equal area on both sides, output force is identical in both directions at 5734 N (0.5 MPa) and 8028 N (0.7 MPa).

This unit includes a magnet for position sensing and uses a PT1/2 port. The retract end is tuned via a mechanical stop screw on the back rod—set your exact end position on the machine, then lock it down. Adjustable air cushions at both ends decelerate the heavy 125mm bore payload smoothly near stroke end.

Airtac SEJ Adjustable Cylinder SEJ125X100-30S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ125X100-30S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ125 mm
Nominal stroke100 mm
Adjustment window30 mm (70–100 mm)
ConfigurationDouble rod, double acting
Port sizePT1/2
Rod threadM27×2
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 500 mm/s
CushionAdjustable, 40 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø125mm)

PressureForce (both directions)
0.5 MPa5734 N
0.7 MPa8027 N
Max (@1.0 MPa)1169 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ125X100-30S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
125Bore size in mm.
×100Nominal stroke length in mm.
-30Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ125X100-30S Is Used

precision_manufacturing

Press Die Tryout

Dial the 30mm window to test different die heights on a large press. The 8028 N both-way force at 0.7 MPa ensures heavy stamping blanks are held securely without directional sag.

factory

Variable-Stop Ejection

Eject large castings from a mold at precise 70-100mm intervals during machine changeover. The M27x2 rear rod allows a cam flag to track the moving end for timing.

sync_alt

Heavy Lifting Sync

Lift heavy pallets using the equal extend and retract forces. The double-rod design prevents the speed differential common in single-rod lifts, keeping massive loads level.

Is the Airtac SEJ Adjustable Cylinder SEJ125X100-30S the Right Cylinder?

Choose this 125mm bore if you need massive equal-force clamping or lifting across a 70-100mm stroke range. Stepping down to the 80mm bore drops your force to 2268 N at 0.5 MPa, while the 125mm is the largest standard SEJ size offering 5734 N at 0.5 MPa. If your stroke never varies, a fixed-stroke SED avoids the extra length of the adjustment mechanism. For position safety, note this cylinder does not hold position on air loss; use an external rod lock for fail-safe clamping.

When replacing an ISO 15552 cylinder, verify your bore, port PT1/2, and mounting style. The SEJ series supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, but omits FB, CA, CB, and CR. The -S magnet pairs directly with CMSE reed and DMSE electronic sensors.

AirtacDistr lists every SEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sej125-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (30mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 30mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ125X100-30S FAQ

The -30 designation means the retract stroke can be adjusted down by 30mm. Your effective stroke range is 70-100mm. You set the exact end position using a stop screw on the rear rod, then lock it in place.

Because it is a double-rod cylinder, force is equal in both directions. It outputs 5734 N at 0.5 MPa, 8028 N at 0.7 MPa, and reaches a maximum of 1169 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ125X100-30S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ125X100-30S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.