
The AirTAC SEJ Adjustable Cylinder SEJ125X100-50 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø125mm unit covers an effective stroke of 50–100mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ125X100-50 is a double-acting, double-rod ISO 15552 profile cylinder with a 50mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas so output force is equal in both directions at 5734 N each way at 0.5 MPa. By turning the stop screw on the back rod, you dial the retract stroke precisely from 50mm up to 100mm to hit an exact machine end-position.
This 125mm bore unit runs on PT1/2 ports, a Ø32mm rod with an M27x2 thread, and a 40mm adjustable air cushion at both ends to decelerate near stroke limits. It lacks a position magnet, meaning no CMSE or DMSE sensors can be fitted to this SKU. The rear protruding rod can also mount a physical cam or flag for external tracking.
| Model | Airtac SEJ Adjustable Cylinder SEJ125X100-50 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø125 mm |
| Nominal stroke | 100 mm |
| Adjustment window | 50 mm (50–100 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M27×2 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 5734 N |
| 0.7 MPa | 8027 N |
| Max (@1.0 MPa) | 1169 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 125 | Bore size in mm. |
| ×100 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the 50-100mm stroke to perfectly align heavy metal sheets before a 5734 N stamping operation, adjusting the mechanical stop without changing hardware.
Use the equal both-way force and back-rod cam to set a precise bending depth on thick plate, fine-tuning the 50mm window during setup.
Adjust the retract end to accommodate different pallet heights on a heavy-duty conveyor, leveraging the 1169 kgf max force to halt large loads.
This 50mm adjustment window is ideal for commissioning a 125mm bore cylinder where the exact retract stop is unknown or needs micro-tuning on the machine. Delivering 5734 N both ways at 0.5 MPa (max 1169 kgf at 1.0 MPa), it provides massive force. If you need less, the neighboring 100mm bore provides 3681 N both ways at 0.5 MPa; if you need more fixed-stroke simplicity without the back rod, consider a standard SE cylinder.
When replacing an ISO 15552 unit, match the 125mm bore, 100mm nominal stroke, PT1/2 port, and mounting choice from the SEJ set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Remember the adjustable air cushion only decelerates the load; it is not a fail-safe lock. For position holding on air loss, use an external rod lock or BSED series cylinder.
AirtacDistr lists every SEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sej125-adjustable-cylinder
Quick checklist
A stop screw on the rear protruding rod lets you mechanically shorten the retract stroke. For this model, you can dial the effective stroke anywhere from 50mm up to the full 100mm, then lock it down.
Because the rod exits both ends, force is identical in both directions. It generates 5734 N at 0.5 MPa, 8028 N at 0.7 MPa, and a maximum of 1169 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.