verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ125X100-50S

The AirTAC SEJ Adjustable Cylinder SEJ125X100-50S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø125mm unit covers an effective stroke of 50–100mm without changing cylinders. Force is equal in both directions.

  • BoreØ125 mm
  • Nominal stroke100 mm
  • Adjust window50 mm
  • Effective stroke50–100 mm
  • Port sizePT1/2
  • CushionAdjustable, 40 mm
$298.46 $305.96Save 2% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ125 stroke, mounting and version on one page All SEJ125 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ125X100-50S

The AirTAC SEJ125X100-50S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 50 mm adjustable stroke window, allowing the retract end position to be dialed in precisely from 50 to 100 mm. A rod exits both ends, yielding identical annulus areas and an equal force of 5734 N each way at 0.5 MPa. It includes a magnet for CMSE or DMSE sensors.

Mechanically, a stop screw on the back rod shortens the retract stroke over the fixed 50 mm window, which is ideal for fine-tuning end positions directly on the machine. The extruded aluminum barrel omits external tie rods, and field-adjustable air cushions at both ends decelerate heavy loads near the stroke ends.

Airtac SEJ Adjustable Cylinder SEJ125X100-50S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ125X100-50S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ125 mm
Nominal stroke100 mm
Adjustment window50 mm (50–100 mm)
ConfigurationDouble rod, double acting
Port sizePT1/2
Rod threadM27×2
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 500 mm/s
CushionAdjustable, 40 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø125mm)

PressureForce (both directions)
0.5 MPa5734 N
0.7 MPa8027 N
Max (@1.0 MPa)1169 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ125X100-50S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
125Bore size in mm.
×100Nominal stroke length in mm.
-50Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ125X100-50S Is Used

precision_manufacturing

Heavy Press Die Changeover

Dial in the 50 to 100 mm retract window to match varying die heights on a large stamping press, utilizing the 5734 N both-way force to shift heavy tooling.

straighten

Variable-Stop Metal Clamping

Tune the end position precisely during commissioning of a heavy-duty clamping fixture, leveraging equal push and pull forces to secure thick steel plates.

sync_alt

Pallet Stopper Alignment

Adjust the stop position on the fly to handle different pallet sizes in a high-mass conveyor line, using the 8028 N both-way force at 0.7 MPa to halt loads.

Is the Airtac SEJ Adjustable Cylinder SEJ125X100-50S the Right Cylinder?

Confirm this 50 mm adjustment window covers your required end-position range. If you need less force, the adjacent bore down is SEJ100, providing 3681 N both ways at 0.5 MPa; if you need more, step up to the SEJ125's maximum 1169 kgf at 1.0 MPa. For fixed-position tasks without end-position tuning, a standard SED double-rod cylinder is sufficient. This plain SEJ does not hold position on air loss—the stop screw and cushion only set the mechanical end and decelerate, so use an external rod lock for fail-safe holding. When replacing an ISO 15552 unit, match the 125 mm bore, 100 mm nominal stroke, 50 mm window, PT1/2 port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, TCM2).

AirtacDistr lists every SEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sej125-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (50mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 50mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ125X100-50S FAQ

The retract stroke can be mechanically dialed in over a 50 mm window using a stop screw on the back rod. The effective stroke range is 50 to 100 mm, which you lock in place after setting the exact end position.

Because the rod exits both ends, the force is identical in both directions: 5734 N at 0.5 MPa and 8028 N at 0.7 MPa. The maximum force is 1169 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ125X100-50S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ125X100-50S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.