verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ125X120-75S

The AirTAC SEJ Adjustable Cylinder SEJ125X120-75S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 75mm window, so this Ø125mm unit covers an effective stroke of 45–120mm without changing cylinders. Force is equal in both directions.

  • BoreØ125 mm
  • Nominal stroke120 mm
  • Adjust window75 mm
  • Effective stroke45–120 mm
  • Port sizePT1/2
  • CushionAdjustable, 40 mm
$311.03 $318.53Save 2% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ125 stroke, mounting and version on one page All SEJ125 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ125X120-75S

The AirTAC SEJ125X120-75S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 75 mm mechanical stroke adjustment window. This yields an effective retract range of 45 to 120 mm, letting you fine-tune the end position directly on the machine without swapping hardware.

This 125 mm bore unit uses a PT1/2 port and a 32 mm rod with an M27x2 thread. The -S magnet enables position detection with CMSE reed or DMSE electronic sensors. Adjustable air cushions at both ends absorb heavy kinetic energy, and the extruded aluminum barrel ensures strict ISO 15552 dimensional interchangeability without external tie rods.

Airtac SEJ Adjustable Cylinder SEJ125X120-75S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ125X120-75S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ125 mm
Nominal stroke120 mm
Adjustment window75 mm (45–120 mm)
ConfigurationDouble rod, double acting
Port sizePT1/2
Rod threadM27×2
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 500 mm/s
CushionAdjustable, 40 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 75mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø125mm)

PressureForce (both directions)
0.5 MPa5734 N
0.7 MPa8027 N
Max (@1.0 MPa)1169 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ125X120-75S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
125Bore size in mm.
×120Nominal stroke length in mm.
-75Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ125X120-75S Is Used

precision_manufacturing

Press Die Changeover

Dial the 75 mm retract window to accommodate different die heights on a 125 mm press, utilizing the full 5734 N both-way force to clamp heavy tooling securely.

factory

Heavy Fixture Clamping

Fine-tune the clamping depth on large machined castings during commissioning, using the M27x2 rod and adjustable air cushions to prevent impact damage on the 125 mm bore.

Is the Airtac SEJ Adjustable Cylinder SEJ125X120-75S the Right Cylinder?

Select this 125 mm bore cylinder when your application requires substantial force and a variable end-stop. The 75 mm adjustment window is ideal for dialing in precise positions during commissioning or product changeovers. If you need less force, the adjacent 100 mm bore provides 3681 N at 0.5 MPa both ways; stepping up is not an option as 125 mm is the largest standard SEJ size. If the exact end position is fixed and never changes, a standard SED double-rod cylinder is sufficient.

For any stroke at or above 300 mm, external guides are recommended to support the rod against side loads, though this 120 mm unit is compact. Remember that the adjustable stop screw and air cushions decelerate the load but do not hold position on air loss; for fail-safe holding, specify an external rod lock. Ensure your ISO 15552 replacement matches the PT1/2 port, 32 mm rod, and desired mounting from the SEJ set (Basic, FA, LB, TC, FTC, TCM1, TCM2).

AirtacDistr lists every SEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sej125-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (75mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 75mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ125X120-75S FAQ

A stop screw on the back rod mechanically shortens the retract stroke over a 75 mm window. This allows the effective stroke to be dialed from 45 mm up to the nominal 120 mm. You lock the screw after setting your desired end position.

Because it is a double-rod cylinder, force is identical in both directions. It outputs 5734 N at 0.5 MPa, 8028 N at 0.7 MPa, and reaches a maximum of 1169 kgf at 1.0 MPa operating pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ125X120-75S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ125X120-75S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.