
The AirTAC SEJ Adjustable Cylinder SEJ125X125-10 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø125mm unit covers an effective stroke of 115–125mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ125X125-10 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 10mm adjustable stroke window. A rear stop screw lets you dial the retract end position, yielding an effective stroke range of 115-125mm for precise machine commissioning without swapping hardware. The extruded aluminum barrel contains no external tie rods.
The Ø32mm rod uses an M27x2 thread, and adjustable air cushions at both ends decelerate the heavy 1169kgf max load near stroke end. This SKU has no magnet, so it lacks position sensing.
| Model | Airtac SEJ Adjustable Cylinder SEJ125X125-10 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø125 mm |
| Nominal stroke | 125 mm |
| Adjustment window | 10 mm (115–125 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M27×2 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 5734 N |
| 0.7 MPa | 8027 N |
| Max (@1.0 MPa) | 1169 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 125 | Bore size in mm. |
| ×125 | Nominal stroke length in mm. |
| -10 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 10mm window to set exact die clearance on a 125mm forming press, using the 8028N both-way force to clamp heavy sheet metal securely.
Fine-tune the 115-125mm effective stroke during line commissioning to match varying part thicknesses without changing out the cylinder mounting.
Verify the 10mm adjustment window covers your exact end-position tolerance. If you need less force, the adjacent bore down is 100mm, providing 3681N both ways at 0.5 MPa. If you need more, there is no larger standard SEJ bore. If your stop position never changes, a fixed-stroke SED avoids the adjustment mechanism. Note that the air cushion and stop screw only set the mechanical end and decelerate motion; they do not hold position on air loss, so use an external rod lock for fail-safe clamping. For any stroke over 300mm, add external guides to prevent side-load wear, though this 125mm stroke is short enough to minimize rod buckling. The PT1/2 port handles high flow for the 30-500mm/s speed range.
AirtacDistr lists every SEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sej125-adjustable-cylinder
Quick checklist
The retract end features a mechanical stop screw that allows you to adjust the stroke over a 10mm window. The effective stroke range is 115-125mm, which you set and lock during machine commissioning.
Because the rod exits both ends, force is equal in both directions. It generates 5734N at 0.5 MPa, 8028N at 0.7 MPa, and a maximum of 1169kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.