verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ125X125-20S

The AirTAC SEJ Adjustable Cylinder SEJ125X125-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø125mm unit covers an effective stroke of 105–125mm without changing cylinders. Force is equal in both directions.

  • BoreØ125 mm
  • Nominal stroke125 mm
  • Adjust window20 mm
  • Effective stroke105–125 mm
  • Port sizePT1/2
  • CushionAdjustable, 40 mm
$311.03 $318.53Save 2% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ125 stroke, mounting and version on one page All SEJ125 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ125X125-20S

The AirTAC SEJ125X125-20S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 20mm adjustable retract stroke window. This allows the effective stroke to be dialed in precisely from 105mm up to 125mm. A rear stop screw sets the exact end position, which you lock in place during commissioning to match a machine stop perfectly.

Because a rod exits both ends, the annular area is identical in both directions, yielding an equal force of 5734 N each way at 0.5 MPa. The extruded aluminum barrel omits external tie rods for a clean ISO 15552 dimensionally interchangeable profile. The integrated -S magnet supports CMSE reed and DMSE electronic sensors for position feedback.

Airtac SEJ Adjustable Cylinder SEJ125X125-20S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ125X125-20S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ125 mm
Nominal stroke125 mm
Adjustment window20 mm (105–125 mm)
ConfigurationDouble rod, double acting
Port sizePT1/2
Rod threadM27×2
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 500 mm/s
CushionAdjustable, 40 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø125mm)

PressureForce (both directions)
0.5 MPa5734 N
0.7 MPa8027 N
Max (@1.0 MPa)1169 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ125X125-20S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
125Bore size in mm.
×125Nominal stroke length in mm.
-20Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ125X125-20S Is Used

straighten

Press Tooling Alignment

Dial in the exact 105-125mm stroke to seat large press tooling, utilizing the 5734 N both-way force to securely clamp heavy metal panels.

swap_horiz

Pallet Changeover Systems

Adjust the retract stop on the fly to accommodate different pallet heights without swapping hardware, moving heavy fixtures with 8028 N at 0.7 MPa.

precision_manufacturing

Heavy Fixture Trial Positioning

Fine-tune the end position during machine commissioning to precisely locate a 125mm bore machining fixture before locking the stop screw.

Is the Airtac SEJ Adjustable Cylinder SEJ125X125-20S the Right Cylinder?

This 125mm bore provides 5734 N both-way force at 0.5 MPa. If your load requires less force, step down to the 100mm bore (3681 N both-way). If you need more power, you are at the top standard bore, but you can increase pressure up to 1.0 MPa for 1169 kgf. If you do not need to fine-tune the end position on the machine, a fixed-stroke SED double-rod cylinder is sufficient. For replacement matching, verify the 125mm bore, 125mm stroke, 20mm window, PT1/2 port, and your specific mounting choice from the SEJ set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Note that the air cushion decelerates the load near stroke end but does not hold position on air loss; for fail-safe holding, use an external rod lock.

AirtacDistr lists every SEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sej125-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (20mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 20mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ125X125-20S FAQ

The -20 code means the retract stroke has a 20mm adjustment window. You mechanically dial a stop screw on the back rod to shorten the nominal 125mm stroke down to a minimum effective stroke of 105mm, allowing precise end-position tuning on the machine.

Because it is a double-rod cylinder, force is identical in both directions: 5734 N at 0.5 MPa, 8028 N at 0.7 MPa, and a maximum of 1169 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ125X125-20S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ125X125-20S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.