verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ125X125-30S

The AirTAC SEJ Adjustable Cylinder SEJ125X125-30S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø125mm unit covers an effective stroke of 95–125mm without changing cylinders. Force is equal in both directions.

  • BoreØ125 mm
  • Nominal stroke125 mm
  • Adjust window30 mm
  • Effective stroke95–125 mm
  • Port sizePT1/2
  • CushionAdjustable, 40 mm
$311.03 $318.53Save 2% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ125 stroke, mounting and version on one page All SEJ125 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ125X125-30S

The AirTAC SEJ125X125-30S is a double-acting, double-rod ISO 15552 profile cylinder. A rod exits both ends, yielding identical annulus areas so thrust is symmetrical: 5734 N each way at 0.5 MPa. The retract stroke is mechanically adjustable via a back-rod stop screw over a 30 mm window, giving an effective stroke range of 95-125 mm.

This 125 mm bore runs on PT1/2 ports with a Ø32 mm rod and M27x2 thread. It carries an -S magnet for CMSE reed or DMSE electronic sensors. Adjustable air cushions at both ends decelerate the 30-500 mm/s motion near the stroke ends. The cushion is a deceleration device, not a lock.

Airtac SEJ Adjustable Cylinder SEJ125X125-30S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ125X125-30S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ125 mm
Nominal stroke125 mm
Adjustment window30 mm (95–125 mm)
ConfigurationDouble rod, double acting
Port sizePT1/2
Rod threadM27×2
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 500 mm/s
CushionAdjustable, 40 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø125mm)

PressureForce (both directions)
0.5 MPa5734 N
0.7 MPa8027 N
Max (@1.0 MPa)1169 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ125X125-30S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
125Bore size in mm.
×125Nominal stroke length in mm.
-30Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ125X125-30S Is Used

precision_manufacturing

Heavy Press Fine-Tuning

Dial the 30 mm stop screw to set exact 125 mm bottom-dead-center on a 5734 N metal stamping press during commissioning without swapping hardware.

swap_horiz

Pallet Changeover

Adjust the retract end to match different pallet thicknesses on a heavy conveyor line, leveraging the equal 8028 N both-way force for stable transfer.

settings

Clamp Position Trial

Iterate the 95-125 mm effective stroke to find the optimal clamping position for varying cast automotive blocks before locking the back-rod stop.

Is the Airtac SEJ Adjustable Cylinder SEJ125X125-30S the Right Cylinder?

Verify the 30 mm retract window covers your required end-position variance. For sizing both ways: the next bore down (100 mm) yields 3681 N each way at 0.5 MPa, while this 125 mm bore delivers 5734 N at 0.5 MPa and 8028 N at 0.7 MPa. If you do not need on-machine stroke adjustment, a fixed-stroke SED double-rod cylinder is simpler. For direct ISO 15552 replacement, match the 125 mm bore, 125 mm stroke, PT1/2 port, and the Basic, FA, LB, TC, FTC, TCM1, or TCM2 mounting subset. A plain SEJ does not hold position on air loss; use an external rod lock for fail-safe holding.

AirtacDistr lists every SEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sej125-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (30mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 30mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ125X125-30S FAQ

The retract end has a 30 mm adjustment window, meaning the effective stroke can be dialed from 95 mm up to 125 mm. You set the exact end position on the machine and lock the back-rod stop screw.

Because the rod exits both ends, force is equal in both directions: 5734 N at 0.5 MPa, 8028 N at 0.7 MPa, and a maximum of 1169 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ125X125-30S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ125X125-30S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.