verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ125X125-40S

The AirTAC SEJ Adjustable Cylinder SEJ125X125-40S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 40mm window, so this Ø125mm unit covers an effective stroke of 85–125mm without changing cylinders. Force is equal in both directions.

  • BoreØ125 mm
  • Nominal stroke125 mm
  • Adjust window40 mm
  • Effective stroke85–125 mm
  • Port sizePT1/2
  • CushionAdjustable, 40 mm
$311.03 $318.53Save 2% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ125 stroke, mounting and version on one page All SEJ125 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ125X125-40S

The AirTAC SEJ125X125-40S is a double-acting, double-rod ISO 15552 profile cylinder featuring a mechanically adjustable retract stroke. A stop screw on the back rod lets you dial the end position over a 40mm window, yielding an effective stroke range of 85-125mm.

This 125mm bore pneumatic cylinder integrates adjustable air cushions at both ends to decelerate heavy loads near the stroke terminus. The included -S magnet enables position detection via CMSE reed or DMSE electronic sensors. It operates at 30-500 mm/s and carries a PT1/2 port, a Ø32mm rod, and an M27x2 rod-end thread for robust industrial integration.

Airtac SEJ Adjustable Cylinder SEJ125X125-40S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ125X125-40S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ125 mm
Nominal stroke125 mm
Adjustment window40 mm (85–125 mm)
ConfigurationDouble rod, double acting
Port sizePT1/2
Rod threadM27×2
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 500 mm/s
CushionAdjustable, 40 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 40mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø125mm)

PressureForce (both directions)
0.5 MPa5734 N
0.7 MPa8027 N
Max (@1.0 MPa)1169 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ125X125-40S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
125Bore size in mm.
×125Nominal stroke length in mm.
-40Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ125X125-40S Is Used

precision_manufacturing

Heavy Press Tonnage Calibration

Dial in the exact 85-125mm bottom-dead-center stop on a hydraulic press fixture, leveraging the 5734 N both-way force to hold heavy stamping dies without re-machining hard stops.

swap_horiz

Pallet Changeover Adjustment

Accommodate varying pallet thicknesses on an automated conveyor line by turning the back-rod stop screw, quickly shifting the retract position to match new part heights.

factory

Injection Mold Ejection Tuning

Fine-tune the ejection stroke on large injection molding machines during commissioning, using the 40mm window to precisely set the knockout rod position for different mold depths.

Is the Airtac SEJ Adjustable Cylinder SEJ125X125-40S the Right Cylinder?

Select this 125mm bore model when your machine requires precise in-situ end-position tuning within the 85-125mm range, as the 40mm stop screw window allows exact stop matching without changing hardware. If your application only needs a fixed stroke without on-machine adjustability, the SED double-rod cylinder is a simpler alternative. For sizing both ways, stepping down to the 80mm bore yields 2268 N at 0.5 MPa, while this 125mm bore provides 5734 N at 0.5 MPa, ensuring you have the necessary thrust for high-force clamping.

Note that the adjustable air cushion decelerates the load near the end of travel but does not lock or hold the position pneumatically; for fail-safe holding on air loss, an external rod lock or a BSED series cylinder is required. Because the nominal stroke is 125mm, ensure external guides support any significant side loads to prevent rod binding.

AirtacDistr lists every SEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sej125-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (40mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 40mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ125X125-40S FAQ

A stop screw on the rear rod mechanically limits the retract travel. For this model, the -40 designation means you can adjust the retract end position over a 40mm window, giving an effective stroke range of 85-125mm. You set the exact stop position on the machine and lock it in place.

Because the double-rod design creates equal annular areas on both sides, the force is identical in both directions: 5734 N at 0.5 MPa, 8028 N at 0.7 MPa, and a maximum of 1169 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ125X125-40S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ125X125-40S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.