verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ125X150-10

The AirTAC SEJ Adjustable Cylinder SEJ125X150-10 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø125mm unit covers an effective stroke of 140–150mm without changing cylinders. Force is equal in both directions.

  • BoreØ125 mm
  • Nominal stroke150 mm
  • Adjust window10 mm
  • Effective stroke140–150 mm
  • Port sizePT1/2
  • CushionAdjustable, 40 mm
$317.28 $324.78Save 2% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ125 stroke, mounting and version on one page All SEJ125 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ125X150-10

The AirTAC SEJ125X150-10 is a double-acting, double-rod ISO 15552 profile cylinder offering an adjustable retract stroke. A rod exits both ends, ensuring the annulus area is identical in both directions. This delivers an equal drive force of 5734 N at 0.5 MPa extend and retract, eliminating speed disparities between directional moves.

You can dial the retract end-position over a 10 mm window via a stop screw on the back rod, yielding an effective stroke range of 140 to 150 mm. Because this SKU lacks the -S magnet option, it does not support CMSE or DMSE position sensing without modification. The extruded aluminum barrel omits external tie rods, and field-adjustable air cushions at both ends absorb kinetic energy near stroke end without acting as a mechanical lock.

Airtac SEJ Adjustable Cylinder SEJ125X150-10 Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ125X150-10
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ125 mm
Nominal stroke150 mm
Adjustment window10 mm (140–150 mm)
ConfigurationDouble rod, double acting
Port sizePT1/2
Rod threadM27×2
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 500 mm/s
CushionAdjustable, 40 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø125mm)

PressureForce (both directions)
0.5 MPa5734 N
0.7 MPa8027 N
Max (@1.0 MPa)1169 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ125X150-10

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
125Bore size in mm.
×150Nominal stroke length in mm.
-10Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ125X150-10 Is Used

precision_manufacturing

Press Tonnage Calibration

Delivering 5734 N both ways, this cylinder dials in the exact 140-150 mm retraction depth needed to calibrate tonnage sensors on heavy stamping presses without swapping hardware.

straighten

Heavy Fixture Clamping

The equal double-rod force securely clamps large automotive castings, while the 10 mm stop-screw window allows operators to fine-tune the grip clearance precisely on the machine floor.

swap_horiz

Pallet Changeover Stops

Adjustable retract positioning accommodates varying pallet heights in packaging lines, using the 125 mm bore's 8028 N at 0.7 MPa to halt heavy pallets smoothly.

Is the Airtac SEJ Adjustable Cylinder SEJ125X150-10 the Right Cylinder?

This 125 mm bore provides 5734 N at 0.5 MPa. If your application requires less force, stepping down to the 80 mm bore yields 2268 N both ways. If you need more power, note that 125 mm is the largest standard SEJ bore, delivering a maximum 1169 kgf at 1.0 MPa. Since the 150 mm stroke is under 300 mm, external side-load guides are less critical than on longer strokes, but the 32 mm rod should still be aligned to prevent binding.

Confirm the 10 mm adjustment window covers your positioning tolerance. If you do not need to fine-tune the end position on the machine, a fixed-stroke SED double-rod cylinder provides the same equal-force dynamics more simply. Remember that the adjustable cushion and stop screw decelerate the load but do not hold position on air loss; for fail-safe holding, specify an external rod lock. When replacing an ISO 15552 cylinder, verify the PT1/2 port, M27x2 rod thread, and mounting style (Basic, FA, LB, TC, FTC, TCM1, or TCM2).

AirtacDistr lists every SEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sej125-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (10mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 10mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ125X150-10 FAQ

A mechanical stop screw on the rear rod lets you shorten the retract stroke by up to 10 mm. This provides an effective stroke range of 140 to 150 mm, which you lock in place after setting the exact end-position.

Because the rod exits both ends, force is identical in both directions: 5734 N at 0.5 MPa, 8028 N at 0.7 MPa, and a maximum of 1169 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ125X150-10

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ125X150-10 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.