verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ125X150-10S

The AirTAC SEJ Adjustable Cylinder SEJ125X150-10S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø125mm unit covers an effective stroke of 140–150mm without changing cylinders. Force is equal in both directions.

  • BoreØ125 mm
  • Nominal stroke150 mm
  • Adjust window10 mm
  • Effective stroke140–150 mm
  • Port sizePT1/2
  • CushionAdjustable, 40 mm
$323.33 $330.83Save 2% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ125 stroke, mounting and version on one page All SEJ125 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ125X150-10S

The AirTAC SEJ125X150-10S is a double-acting, double-rod ISO 15552 profile cylinder with a 10 mm adjustable stroke window. A rod exits both ends, meaning the effective retract stroke can be dialed from 140 mm up to 150 mm. Because the piston sees equal annulus area on both sides, output force is identical in both directions at 5734 N (0.5 MPa).

This 125 mm bore actuator features a PT1/2 port and a robust Ø32 mm rod with an M27x2 end thread. The included magnet (-S) supports CMSE reed and DMSE electronic sensors for position feedback. Field-adjustable air cushions at both ends absorb kinetic energy, while the rear stop screw lets you lock the exact end position during machine commissioning.

Airtac SEJ Adjustable Cylinder SEJ125X150-10S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ125X150-10S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ125 mm
Nominal stroke150 mm
Adjustment window10 mm (140–150 mm)
ConfigurationDouble rod, double acting
Port sizePT1/2
Rod threadM27×2
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 500 mm/s
CushionAdjustable, 40 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø125mm)

PressureForce (both directions)
0.5 MPa5734 N
0.7 MPa8027 N
Max (@1.0 MPa)1169 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ125X150-10S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
125Bore size in mm.
×150Nominal stroke length in mm.
-10Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ125X150-10S Is Used

precision_manufacturing

Press Tonnage Calibration

Dial in the exact 140-150 mm bottoming position during heavy press commissioning, utilizing 8028 N of both-way force at 0.7 MPa to form thick steel blanks accurately.

swap_horiz

Automated Pallet Changeover

Adjust the retract stop on the fly to accommodate varying pallet heights without swapping hardware, using the massive 1169 kgf max force to shift loaded pallets.

factory

Heavy Fixture Clamping

Fine-tune the clamping reach on large machining fixtures, relying on equal extend and retract forces to securely hold cast iron engine blocks during milling.

Is the Airtac SEJ Adjustable Cylinder SEJ125X150-10S the Right Cylinder?

Verify the 10 mm adjustment window provides enough tuning range for your end-position requirements. If you need less force, stepping down to the 100 mm bore yields 3681 N at 0.5 MPa; if you need more, note that 125 mm is the largest standard SEJ bore delivering 5734 N at 0.5 MPa and 8028 N at 0.7 MPa. If your application never requires stroke changes, a fixed-stroke SED saves space.

The adjustable air cushion decelerates the load near stroke end but does not hold position on air loss; for fail-safe holding, specify an external rod lock. Because this cylinder is ISO 15552 dimensionally interchangeable, you can match it by bore, stroke, PT port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2).

AirtacDistr lists every SEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sej125-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (10mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 10mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ125X150-10S FAQ

A stop screw on the rear rod lets you mechanically shorten the retract stroke by up to 10 mm. The effective stroke range is 140-150 mm, which you set and lock during machine commissioning.

Because it is a double-rod cylinder, force is equal in both directions. It provides 5734 N at 0.5 MPa, 8028 N at 0.7 MPa, and a maximum of 1169 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ125X150-10S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ125X150-10S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.