
The AirTAC SEJ Adjustable Cylinder SEJ125X150-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø125mm unit covers an effective stroke of 130–150mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ125X150-20S is a double-acting, double-rod ISO 15552 profile cylinder with a 20 mm adjustable stroke window. A rod exits both ends, meaning the annular area is identical in both directions.
A stop screw on the back rod lets you mechanically dial the retract end position down to 130 mm from the 150 mm nominal stroke. The extruded aluminum barrel has no external tie rods, and the included -S magnet enables position detection via CMSE reed or DMSE electronic sensors.
| Model | Airtac SEJ Adjustable Cylinder SEJ125X150-20S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø125 mm |
| Nominal stroke | 150 mm |
| Adjustment window | 20 mm (130–150 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M27×2 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 5734 N |
| 0.7 MPa | 8027 N |
| Max (@1.0 MPa) | 1169 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 125 | Bore size in mm. |
| ×150 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the retract stroke 20 mm to accommodate varying die heights during press setup, using the full 5734 N both-way force to clamp heavy tooling.
Fine-tune the mechanical wood stop position on the machine during commissioning without disassembling the hardware, locking the back rod screw exactly at the cut mark.
Test bend positions on thick plate by adjusting the end point in 20 mm increments, leveraging the equal push-pull force for stable forming and retraction.
Verify your end-position tolerance fits the 20 mm retract window (effective stroke 130-150 mm). If you need less force, stepping down to the 100 mm bore yields 3681 N at 0.5 MPa both ways; if you need more, this 125 mm bore provides the maximum 5734 N both ways at 0.5 MPa. If exact end-position tuning is unnecessary, a fixed-stroke SED avoids the extra length. For fail-safe load holding on air loss, use a BSED or external rod lock, as the adjustable air cushion only decelerates near stroke end. Match ISO 15552 replacements by port PT1/2, M27x2 rod thread, and mounting from Basic, FA, LB, TC, FTC, TCM1, or TCM2.
AirtacDistr lists every SEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-sej125-adjustable-cylinder
Quick checklist
A stop screw on the rear rod mechanically shortens the retract stroke. For this model, you can dial the end position within a 20 mm window, giving an effective stroke range of 130 to 150 mm. You lock the screw after setting the exact position.
Because it is a double-rod cylinder, the force is identical in both directions. It provides 5734 N at 0.5 MPa, 8028 N at 0.7 MPa, and a maximum of 1169 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.